{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Torque wrench “Safe-Torque A 2” with 1/4 inch bit holder and scale, maximum torque: 12N·m
Article no.: 2019999
Catalog no.: 657774
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Adapter for 1/4 inch sockets.
Click to enlarge image
Overslip mechanism prevents excessive torques from being applied.
Click to enlarge image
Click to enlarge image
Click to enlarge image
Magnetic holder for 1/4 inch bits with C 6.3 and E 6.3 shank.
Click to enlarge image
For right-hand and left-hand threads.
Click to enlarge image
Torque lock function.
Click to enlarge image
Easy adjustment of the torque value.
Click to enlarge image
Small backswing angle.
Click to enlarge image
Click to enlarge image
Click to enlarge image
Beschreibung der Legende siehe Beschreibungstext.
Offers
Product details
Technical Data
| Series | Safe-Torque | |
| Manufacturer’s designation | Safe-Torque A 2 | |
| Power supply | no energy supply | |
| Colour | green; black | |
| Min. working angle | 5 degrees | |
| Number of teeth (detent) | 72 | |
| Width of output part | 31.6 mm | |
| Height of output part | 23.7 mm | |
| Deflection function | no | |
| Slipper function | yes | |
| Adjustable trigger value | adjustable | |
| Unit of measure for torque | Nm; lbf ft | |
| Min. torque, Nm | 2 | |
| Min. torque, lbf ft | 2 | |
| Max. torque, Nm | 12 | |
| Max. torque, lbf ft | 9 | |
| Setting the trigger value | with adjustment scale | |
| Quick release / quick-change function | no | |
| Bit holder, bit holder | D 6; F 6 | |
| Size, bit holder | 1/4 in | |
| Unit of measure for scale graduations | Nm | |
| Scale graduation, 1 graduation | 0.1 Nm | |
| Data can be recorded | no | |
| Trigger principle | mechanical slip clutch | |
| Trigger signal | acoustic; haptic | |
| Feedback | triggering | |
| Can be calibrated | yes | |
| Content | single part | |
| Type of product | torque wrenches | |
| Direction of tightening | right-left | |
| Shape of connection | bit holder | |
| Measurement technology | mechanical | |
| Measuring functions | torque | |
| DIsplay | analogue | |
| Torque range (min.) | 2 Nm | |
| Torque range (max.) | 12 Nm | |
| Torque accuracy clockwise | 10 % | |
| Manufacturer’s test certificate | yes | |
| Standard | DIN EN ISO 6789 | |
| Overall length | 244 mm | |
| Total weight | 552 g |
Identification & Classification
| Article number | 2019999 | |
| Catalog number | 657774 | |
| EAN / GTIN | 4013288223036 | |
| Manufacturer number | 05075801001 | |
| Manufacturer/responsible person | Wera Werkzeuge GmbH, Korzerter Straße 21-25, 42349 Wuppertal, Germany, www.wera.de |
Description
Version:
The special slipping trigger mechanism reliably prevents unintentional overtightening. Desired torque value is easily set and saved as the user can hear and feel the device engage upon reaching the scale value. The 72 fine-pitched teeth enable a low return angle of only 5°.
With 1/4 inch bit holder.
With 1/4 inch bit holder.
Advantage:
Torque lock function: The torque function can be switched off – the tool can therefore also be used as a standard ratchet with high release torques and for applications involving defined rotational angles.
Function:
On reaching the set torque value the wrench triggers a clearly detectable deflection and is then immediately ready for use again. The overslip trigger mechanism ensures that the set torque values are not exceeded.
Standard:
Tested to DIN EN ISO 6789.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque