{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Value pack GARANT Master Steel solid carbide mini milling cutter HPC, 5 pieces
Article no.: 2023443
Catalog no.: GG2291
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Series | Master Steel | |
| Wet maximum | suitable | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Holder shape | form B | |
| Holder version | metric | |
| Holder size, metric | 0060 mm | |
| Dry machining | suitable | |
| Holder tolerance class | h6 | |
| Shank diameter | 6 mm | |
| Shank length | 46 mm | |
| Oil | suitable | |
| Shank type | HB | |
| Air | suitable | |
| Tool material | solid carbide | |
| Coating | TiAlN | |
| Cutter diameter | 2 mm | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance Class | e8 | |
| Cutting edge length | 4 mm | |
| ISO milling cutter type | N | |
| Number of effective cutters, peripheral side | 3 | |
| Twist direction | right-hand | |
| Twist angle | 30 degrees | |
| Number of corner versions | 1 | |
| Corner / edge | 1 | |
| Corner version | sharp-edged | |
| Spacing of the cutters | the same | |
| Direction of infeed | horizontal, oblique and vertical | |
| Number of clamping slots | 3 | |
| Interface | joint 1 | |
| Gauge length | 4 mm | |
| Usable length | 4 mm | |
| Overall length | 50 mm | |
| Functional length | 4 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | Werksnorm | |
| Machining method | End milling; face milling; slot milling | |
| Colour ring | green | |
| Machining strategy | HPC | |
| Type of product | shoulder mill | |
| Correction factor fz | 1.5 | |
| Cutting depth min. | 0.01 mm | |
| Max. cutting depth | 3 mm; 4 mm |
Identification & Classification
| Article number | 2023443 | |
| Catalog number | GG2291 | |
| EAN / GTIN | 4067263091585 | |
| Manufacturer number | GG2291 2 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
290
N
240
P
140
P
120
P
100
P
70
P
50
M
90
M
70
S
40
K
85
Description
Version:
Extra short cutter for maximum stability. Shank length to DIN for improved support of the tool in the holder. This significantly increases the tool life.
Save the regrinding costs: It is cheaper to use a carbide mini milling cutter to the limit of wear and throw it away, than to regrind it.
Same as No. 202291.
Save the regrinding costs: It is cheaper to use a carbide mini milling cutter to the limit of wear and throw it away, than to regrind it.
Same as No. 202291.