{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Value pack GARANT Master Steel solid carbide mini milling cutter HPC, 5 pieces
Article no.: 2023479
Catalog no.: GG2297
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Number of pieces | 5 pcs. | |
| Series | Master Steel | |
| Manufacturer’s designation | GARANT Master Steel VHM-Mini-Fräser HPC | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Shank diameter DS | 6 mm | |
| Shank type | HB | |
| Tool material | solid carbide | |
| Coating | TiAlN | |
| Cutter diameter Dc | 2.5 mm | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance class | e8 | |
| Cutting edge length Lc | 5 mm | |
| ISO milling cutter type | N | |
| Number of effective cutters (peripheral side) Z | 3 | |
| Twist angle | 45 degrees | |
| Corner / edge | 1 | |
| Corner version | as chamfer | |
| Corner chamfer width | 0.03 mm | |
| Corner chamfer angle | 45 degrees | |
| Spacing of the cutters | the same | |
| Direction of infeed | horizontal, oblique and vertical | |
| Interface | joint 1 | |
| Usable length L1 | 5 mm | |
| Overall length L | 50 mm | |
| Tool version | solid carbide | |
| Standard | Werksnorm | |
| Machining method | shoulder milling (FEC); slot milling (FNU) | |
| Colour ring | green | |
| Machining strategy | HPC | |
| Type of product | shoulder mill | |
| Content | set | |
| Correction factor fz | 1.5 | |
| Cutting depth min. | 0.03 mm | |
| Max. cutting depth L2 | 5 mm; 3.75 mm |
Identification & Classification
| Article number | 2023479 | |
| Catalog number | GG2297 | |
| EAN / GTIN | 4067263091820 | |
| Manufacturer number | GG2297 2,5 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
290
N
240
P
140
P
120
P
100
P
70
P
50
M
90
M
70
S
40
K
85
Description
Version:
Extra short cutter for maximum stability. Shank length to DIN for improved support of the tool in the holder. This significantly increases the tool life.
Save the regrinding costs: It is cheaper to use a carbide mini milling cutter to the limit of wear and throw it away, than to regrind it.
Same as No. 202297.
Save the regrinding costs: It is cheaper to use a carbide mini milling cutter to the limit of wear and throw it away, than to regrind it.
Same as No. 202297.