{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Pallet basic and add-on rack, Depth 1100 mm, Height: 1+1mm
Article no.: 2025280
Catalog no.: 991249
Article code:
Click to enlarge image
Basic rack
Click to enlarge image
Basic rack and extension rack
Click to enlarge image
Application example
Click to enlarge image
Product details
Technical Data
| RAL colour | RAL 5017; RAL 2004 | |
| Part described | Rahmenprofil; cross beam | |
| Coating | powder-coated | |
| Colour, blue | Traffic blue | |
| Colour, orange | Pure orange | |
| Part described | Ständer; Holme | |
| Number of storage levels | 3 | |
| Equipped with stores handling equipment | yes | |
| Placing a pallet into storage | yes | |
| To take pallets with load capacity | 820 kg | |
| Number of cross beams / crossbars | 2 | |
| Type of stile | LNS 110x50x1,5 | |
| Height of stile | 110 mm | |
| Frame profile | S610-M18-U | |
| Number of profile frames | 2 | |
| Material | sheet metal | |
| Colour | blue; orange | |
| Type of product | pallet racking | |
| Height adjustment interval | 50 mm | |
| Width of compartment | 2’700 mm | |
| Shelf load max. | 2’460 kg | |
| Bay load max. | 5’320 kg | |
| Delivery | completely in individual parts | |
| Type of installation | plug-in system | |
| Rack installation | basic rack | |
| Nominal depth | 1’100 mm | |
| Nominal height | 3’000 mm | |
| External dimension width | 2’872 mm |
Identification & Classification
| Article number | 2025280 | |
| Catalog number | 991249 | |
| EAN / GTIN | 2000001100448 | |
| Manufacturer/responsible person | Gebr. Schulte GmbH & Co. KG, Zum Dümpel 22, 59846 Sundern, Germany, www.schulte-lagertechnik.com |
Description
Version:
Basic rack consisting of 2 profile frames each with 4 floor anchors and 2 or 3 cross beam pairs. Add-on rack consisting of 1 profile frame with 4 floor anchors and 2 or 3 cross beam pairs. Additional storage levels can be found under accessories.
Cross beams type LNS 110×50×1.5.
Set consisting of 1 pc. basic rack and 1 pc. extension rack.
Cross beams type LNS 110×50×1.5.
Set consisting of 1 pc. basic rack and 1 pc. extension rack.
Description:
Assembled size:
Overall length of the rack:
For frame stiles S610-M18-U and S625-A18:
Nominal length + number of stiles × 86 mm (for S610-M18-U)
Nominal length + number of stiles × 110 mm (for S625-A18).
Overall length of the rack:
For frame stiles S610-M18-U and S625-A18:
Nominal length + number of stiles × 86 mm (for S610-M18-U)
Nominal length + number of stiles × 110 mm (for S625-A18).
Colour:
Stiles similar to RAL 5017 traffic blue, cross beams similar to RAL 2004 pure orange powder-coated.
Note:
Technical provisions for erection of pallet racking according to BGR 234:
Further information on planning and design:
When fitting cross-beams, make sure that the outer stiles project at least 500 mm above the topmost storage level. Within the row of racking, a projection of 100 mm is sufficient.
- End stiles adjacent to gangways and traffic routes must be at least 500 mm higher that the highest storage level.
- Pass-throughs and spans must be provided with a closure board (e.g. chipboard sheet).
- Clear pass-through height must be at least 2100 mm.
- End stiles and pass-throughs must be fitted with crash barriers.
- Single-sided racking that is free-standing in a room must be fitted with mesh rear panels to prevent stored goods falling out.
- Each row of racking must carry safe working load signs.
- Concrete grade: at least C20/25 to EN 206-1 (DIN 1045-2); concrete thickness at least 200 mm.
- If the distance between pallets in a double-sided rack is less than 100 mm, insertion stops should be provided.
Further information on planning and design:
- An important factor is the unsupported length (K) = the maximum distance between floor and the upper edge of the first cross-beam. The stile type is determined by this factor.
- Approx. 100 mm clearance should always be allowed to the next storage level, or the shop ceiling.
- Lift height of the handling equipment: top of the uppermost cross beam plus 200 mm.
- On uneven floors we recommend additional shim plates.
- Supplied for self-assembly, saving freight costs. Delivered unassembled.
- Allow at least 100 mm for the foot plates between the frame stiles and walls or parts of the building.
When fitting cross-beams, make sure that the outer stiles project at least 500 mm above the topmost storage level. Within the row of racking, a projection of 100 mm is sufficient.