{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for turning DNMG 150604, for finish machining
Article no.: 2026384
Catalog no.: 250730
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Series | ISOTURN | |
| Wet maximum | suitable | |
| Manufacturer’s designation | DNMG 150604-F3P IC8150 | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | rhombic | |
| Insert width | 15.5 mm | |
| Blade thickness | 6.35 mm | |
| Insert length | 15.5 mm | |
| Insert version | neutral | |
| Cutting edge length | 15.5 mm | |
| Insert diameter | 12.7 mm | |
| Corner radius | 0.4 mm | |
| Corner angle | 55 degrees | |
| ISO-Code | DNMG 150604 | |
| Tool material | Carbide | |
| Machining group | P (steel) | |
| Coating | CVD | |
| Insert thickness | 6.35 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | DNMG 150604 | |
| Interface coding for insert according to ISO TS 13399-60 | DNMG 150604 | |
| Insert designation | DNMG 150604 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Suitable for material | steel (P) | |
| Tolerance Class | M | |
| Machining method | parting off (ESA) | |
| Finishing / roughing assignment | Finishing | |
| Type of fastening | Hole | |
| Chip breaker | yes |
Identification & Classification
| Article number | 2026384 | |
| Catalog number | 250730 | |
| EAN / GTIN | 7291075319989 | |
| Manufacturer number | 5566824 |
Application Table
P
P
P
P
K
Description
Note:
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.