{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
FLASHPENTA PMN D-J/D-C insert, IC908, Groove width w / insert size: 3/40mm
Article no.: 2026405
Catalog no.: 273581
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Series | FLASHPENTA | |
| Wet maximum | suitable | |
| Manufacturer’s designation | PMN D40-3C02 IC908 | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Thickness of the insert S | 4.76 mm | |
| Length of cutting insert L | 40 mm | |
| Insert version | neutral | |
| Groove width w | 3 mm | |
| Groove depth max. tmax | 20 mm | |
| ISO-Code | PMN | |
| Type of chip breaker | STD | |
| Tool material | Carbide | |
| Machining group | H (hard materials); K (cast iron); M (stainless steel); N (non-ferrous metals); P (steel); S (difficult-to-machine materials) | |
| Tool application group | Abstechen / Einstechen | |
| Coating | PVD | |
| Grade | IC908 | |
| Interface coding for insert | PMN D-J/D-C | |
| Insert designation | PMN D40-3C02 IC908 | |
| Type of product | grooving insert | |
| With ISO code | yes | |
| Number of teeth | 5 pcs. | |
| Direction of action | neutral | |
| Suitable for material | cast iron (K); hardened steel (H); heat-resistant super-alloys (S); non-ferrous materials (N); stainless steel (M); steel (P) | |
| Machining method | parting off (ESA) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Chip breaker | yes | |
| Cutter version | chamfered (T) | |
| Cutting conditions | continuous | |
| Number of potential uses | 5 pcs. | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 2026405 | |
| Catalog number | 273581 | |
| EAN / GTIN | 7291075380590 | |
| Manufacturer number | 3329274 |
Description
Version:
For parting off rods and hard materials, and for difficult applications. Chip breakers with a pronounced protective chamfer. Medium to high feed rates.
Suitable for:
Attention:
The maximum groove depth tmax applies only up to workpiece ⌀ 40 mm. From workpiece ⌀ > 40 mm, the maximum groove depth is reduced.
Note:
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.