{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
TPKT 100304PDR, IC808, Type: ST900
Article no.: 2026433
Catalog no.: 226501
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Series | HELI3MILL | |
| Wet maximum | suitable | |
| Manufacturer’s designation | HM390 TPKT 100304PDR IC808 | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | triangular | |
| Thickness of the insert S | 3.85 mm | |
| Length of cutting insert L | 10.9 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 8 mm | |
| Corner radius R | 0.4 mm | |
| Corner angle | 60 degrees | |
| Rake angle | 11 degrees | |
| ISO-Code | TPKT 100304PDR | |
| Tool material | Carbide | |
| Machining group | K (cast iron); M (stainless steel); N (non-ferrous metals); P (steel) | |
| Tool application group | P10-P40; M10-M35; K10-K30; N10-N20 | |
| Coating | PVD | |
| Insert thickness T | 3.85 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | TPKT 100304PDR | |
| Interface coding for insert according to ISO TS 13399-60 | TPKT 100304PDR | |
| Insert designation | TPKT 100304PDR | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Number of teeth | 3 pcs. | |
| Direction of action | neutral | |
| Suitable for material | cast iron (K); non-ferrous materials (N); stainless steel (M); steel (P) | |
| Machining method | shoulder milling (FEC) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | continuous | |
| Number of potential uses | 3 pcs. | |
| Content | 1 pcs. | |
| Correction factor fz | 1.5 |
Identification & Classification
| Article number | 2026433 | |
| Catalog number | 226501 | |
| EAN / GTIN | 2000001103784 | |
| Manufacturer number | 5667759 |
Application Table
P
300
P
280
P
260
P
240
P
220
Description
Version:
Trigon indexable insert with 3 helical cutting edges. Axial and radial positive cutting edge design. For effective and precise machining of 90° shoulders.
Note:
Standard application values for ae = 0.3 to 1 × D / ap max = 8.0 mm.
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.