{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
SZMU 080408PNTR, IC810, Type: GGG
Article no.: 2026695
Catalog no.: 225810
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Series | NEODO | |
| Wet maximum | suitable | |
| Manufacturer’s designation | S890 SZMU 080408PNTR IC810 | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Base form | square | |
| Wide insert B | 8.2 mm | |
| Thickness of the insert S | 4.76 mm | |
| Length of cutting insert L | 5.2 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 8.2 mm | |
| Diameter of the cutting insert d | 8.2 mm | |
| Corner radius R | 0.8 mm | |
| ISO-Code | SZMU 080408PNTR | |
| Wiper length axial Lwa | 1.6 mm | |
| Tool material | Carbide | |
| Machining group | K (cast iron); M (stainless steel); P (steel) | |
| Tool application group | Fräsen | |
| Coating | PVD | |
| Grade | IC908 | |
| Insert thickness T | 4.76 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | SZMU 080408PNTR | |
| Interface coding for insert according to ISO TS 13399-60 | SZMU 080408PNTR | |
| Insert designation | SZMU 080408PNTR | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 8 pcs. | |
| Direction of action | neutral | |
| Suitable for material | cast iron (K); stainless steel (M); steel (P) | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | chamfered (T) | |
| Number of potential uses | 4 pcs. | |
| Content | 1 pcs. | |
| Correction factor fz | 1.5 |
Identification & Classification
| Article number | 2026695 | |
| Catalog number | 225810 | |
| EAN / GTIN | 2000001104194 | |
| Manufacturer number | 3408193 |
Application Table
K
280
K
260
Description
Version:
Double-sided indexable insert with 8 helical cutting edges. Special cutting edge geometry for smooth cutting to reduce power consumption during machining.
Note:
Standard application values for ae = 0.3 to 1 × D / ap max = 5.0 mm.
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.