{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
SUMOCHAM drilling head ICP k7, IC908, ⌀ DC: 22mm
Article no.: 2026756
Catalog no.: 231740
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
154° point angle / 140° cutter angle
Product details
Technical Data
| Cooling lubricant | yes | |
| Series | SUMOCHAM | |
| Manufacturer’s designation | ICP 220 IC908 | |
| Cutter diameter min. | 22 mm | |
| Configurable | no | |
| Number of teeth | 2 | |
| Point angle | 140 degrees | |
| Insert thickness | 12.76 mm | |
| For base body size | 22 mm | |
| Tool material | Carbide | |
| Machining group | H (hard materials); M (stainless steel); P (steel) | |
| Coating | TiAlN | |
| Grade | IC908 | |
| Insert thickness | 12.76 mm | |
| Functional length | 9.44 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Machining method | drilling into solid material | |
| Type of product | cutter insert for boring | |
| Content | single part |
Identification & Classification
| Article number | 2026756 | |
| Catalog number | 231740 | |
| EAN / GTIN | 7291075247336 | |
| Manufacturer number | 5506652 |
Application Table
P
100
P
90
P
100
P
70
P
55
H
35
H
35
H
70
H
60
H
35
M
50
M
50
S
35
S
35
K
120
N
155
Description
Version:
Vee ground drilling head for precise positioning and stable seating. Angled, radial stop surfaces for a significant increase in clamping force due to the cutting forces acting during machining. For productive drilling with high feed rates.
ICP
Main area of application ISO P, ISO M (especially duplex) as well as ISO H. Unique cutting edge preparation for the best possible compromise between cutting edge stability and cutting sharpness.
ICP
Main area of application ISO P, ISO M (especially duplex) as well as ISO H. Unique cutting edge preparation for the best possible compromise between cutting edge stability and cutting sharpness.
Note:
Cutting data applies for the base body 5×D. Drill pilot holes exclusively with drilling head of the same type – in particular for drilling heads FCP and QCP-2M. Please observe the application instructions for the base body. Cutting tolerance of the inserts: k7 (positive toleranced cutting edge diameter).
Designation convention: [type] [⌀ DC]-[addition] [cutting material]
Examples:
No. 231740 6.5 ICP 065 IC908
No. 231742 18.5 ICP 185-2M IC908
No. 231745 18.5 HCP 185-IQ IC908
Designation convention: [type] [⌀ DC]-[addition] [cutting material]
Examples:
No. 231740 6.5 ICP 065 IC908
No. 231742 18.5 ICP 185-2M IC908
No. 231745 18.5 HCP 185-IQ IC908