{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
SUMOCHAM drill body Parallel shank DCN R, 12×D, Size: 23
Article no.: 2027226
Catalog no.: 231720
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Cooling lubricant | yes | |
| Series | SUMOCHAM | |
| Manufacturer’s designation | DCN 230-276-32R-12D | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Shank diameter DS | 32 mm | |
| Length of shank LS | 60 mm | |
| Cutter diameter, min. Dc | 23 mm | |
| Cutter diameter, max. Dc | 23.9 mm | |
| Flute length | 280.2 mm | |
| Number of cutting edges, total | 2 | |
| Interface | joint 1 | |
| Gauge length A | 276 mm | |
| Cutting direction | right-hand cutting | |
| Machining method | drilling into solid material (BVB) | |
| Type of product | indexable drill for cutter inserts | |
| Content | single part |
Identification & Classification
| Article number | 2027226 | |
| Catalog number | 231720 | |
| EAN / GTIN | 7291075297140 | |
| Manufacturer number | 3202856 | |
| Article class | 23K |
Description
Version:
SUMOCHAM interchangeable head drilling system for highly efficient drilling with interchangeable drilling heads. Unique clamping mechanism for convenient fixing of the drilling head without additional clamping screw. Versatile material use due to comprehensive drilling head range. Optimum tool stability with twisted coolant channels for high concentricity and lowest possible axial run-out of the bore. Other available versions: base body with round shank, base body for machining chamfers on bores when a chamfer ring is attached, base body especially for use in multi-spindle, sliding headstock and production lathes.
Tolerance class: IT8-IT9, concentricity: 0.03 mm.
Tolerance class: IT8-IT9, concentricity: 0.03 mm.
Application:
Supplied with:
Drill body incl. assembly key for drilling heads.
Note:
- Always select a strategy with medium cutting speeds and high feed rates.
- No rapid traverse and no spindle anti-clockwise rotation during retraction.
- For drilling depths of 8×D and more, piloting of at least 1.5 × DC with
same cutter insert required. - Drilling convex / concave surfaces: Radius of curvature > 15 × DC required, reduce feed rate by up to 50%.
- For cross holes, the maximum permissible diameter is 1/4 of the nominal diameter DC.
- Stack drilling requires stable conditions, reduce gaps between workpiece elements.
- Oblique drill entry and exit up to 7° inclination possible with reduced feed rate (approx. 20 - 30%).
- Designation convention 8×D: DCN [size]-[L1]-[⌀DS]A-[L/D]
- Designation convention 12×D: DCN [size]-[L1]-[ØDS]R-[L/D]
No. 231715 6 DCN 060-048-12A-8D
No. 231720 8 DCN 080-096-12R-12D