{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
SYHU 0704ADTN, IC5100, Type: GG
Article no.: 2027289
Catalog no.: 222519
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Series | DOVEIQMILL | |
| Wet maximum | suitable | |
| Manufacturer’s designation | IQ845 SYHU 0704ADTN IC5100 | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable | |
| Base form | octagonal | |
| Insert width | 7 mm | |
| Blade thickness | 4.76 mm | |
| Insert version | neutral | |
| Cutting edge length | 7 mm | |
| Corner radius | 0.8 mm | |
| Rake angle | 7 degrees | |
| ISO-Code | SYHU 0704ADTN | |
| Tool material | Carbide | |
| Machining group | K (cast iron); M (stainless steel); P (steel) | |
| Tool application group | Fräsen | |
| Coating | coated | |
| Insert thickness | 4.76 mm | |
| Interface coding for insert | SYHU 0704ADTN | |
| Insert designation | SYHU 0704ADTN | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 8 pcs. | |
| Direction of action | neutral | |
| Suitable for material | cast iron (K); stainless steel (M); steel (P) | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | continuous | |
| Number of potential uses | 8 pcs. | |
| Content | 1 pcs. | |
| Correction factor fz | 1.5 |
Identification & Classification
| Article number | 2027289 | |
| Catalog number | 222519 | |
| EAN / GTIN | 2000001105474 | |
| Manufacturer number | 5607525 |
Application Table
K
300
K
220
Description
Version:
Double-sided indexable insert with 8 cutting edges. Large flat chamfer for high surface qualities. Positive rake angle for optimum chip breaking.
Note:
Standard application values for ae = 0.6 to 1.0×D / ap max = 4.6 mm.
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.