{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
SZMU 080408PNRMM, IC5600, Type: ST900
Article no.: 2027293
Catalog no.: 225800
Article code:
Product details
Technical Data
| Max. cutting depth ap | 5 mm; 5 mm | |
| Wet maximum | suitable only under restricted conditions | |
| Dry machining | suitable | |
| Air | suitable | |
| Cooling lubricant | yes | |
| Series | NEODO | |
| Manufacturer’s designation | S890 SZMU 080408PNRMM IC5600 | |
| Base form | square | |
| Thickness of insert S | 4.76 mm | |
| Insert version | right-hand | |
| Length of cutting edge l | 5.2 mm | |
| Diameter of insert d | 8.2 mm | |
| Corner radius R | 0.8 mm | |
| Corner angle | 88.4 degrees | |
| ISO-Code | SZMU 080408PNRMM | |
| Type of chip breaker | MM | |
| Cutting depth ap, max. | 5 mm | |
| Cutting depth in use | Full slot milling; Side milling | |
| Feed rate per tooth min. fz | 0.25 mm | |
| Feed rate per tooth max. fz | 0.25 mm | |
| Tool material | Carbide | |
| Machining group | P (steel) | |
| Cutting media, manufacturer’s designation | IC5600 | |
| Insert thickness T | 4.76 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | SZMU 0804 | |
| Insert designation | SZMU 080408PNRMM | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Number of teeth | 8 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | steel (P) | |
| Tolerance Class | M | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Number of potential uses | 4 pcs. | |
| Content | single part | |
| Correction factor fz | 1.5 |
Packaging units
| 1 Carton | 10 pieces | |
| 1 Pack | 10 pieces |
Identification & Classification
| Article number | 2027293 | |
| Catalog number | 225800 | |
| EAN / GTIN | 2000001105511 | |
| Manufacturer number | 3427961 | |
| Article class | 19A |
Application Table
P
200
P
180
P
170
P
150
P
140
Description
Version:
Double-sided indexable insert with 8 helical cutting edges. Special cutting edge geometry for smooth cutting to reduce power consumption during machining.
Note:
Standard application values for ae = 0.3 to 1 × D / ap max = 5.0 mm.
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.