{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Hex Head screws partial threaded ISO 4014-8.8 U hot-dip galvanized M10x75 mm
Article no.: 2027518
Catalog no.: 1569
Article code:
Product details
Technical Data
| d1 | M10 | |
| L | 75 mm | |
| Norm ISO | 4014 | |
| Shank | partial threaded | |
| b | 26 mm | |
| Material | Steel | |
| Surface | hot-dip galvanized | |
| e | 6.4 mm | |
| Head shape | Hexagonal head | |
| s | 16 mm | |
| Thread type | Metric standard thread | |
| Norm DIN | ~931 (Norm withdrawn) | |
| Drive | Hexagon | |
| Strength class | 8.8 | |
| k | 18.9 mm |
Packaging units
| 1 Pack | 100 Pieces |
Identification & Classification
| Article number | 2027518 | |
| Catalog number | 1569 | |
| EAN / GTIN | 7610106740422 | |
| Article class | OAK |
Description
Version:
- Made with thread undersize of tolerance class 6az (thread play) before application of surface protection (DIN EN ISO 10684).
- The screws are "ISO fit" after hot-dip galvanizing.
- The screws must never be paired with nuts with thread oversize. This may cause bolting problems and joint failure.
Note:
For complete range see Hex Head screws partial threaded DIN 931 / ISO 4014-8.8 U hot-dip galvanized (DIN interchangeable with ISO - exception M10, M12, M14, M22 due to different width across flats)