fixed point saddle medium weight FFS-M

The fixed point solution for medium loads up to 23 kN

The solid design of the fixed point and the solid substrate connection allow high loads to be absorbed for a stable and secure connection.
The fixed points consist of components with the same thread sizes and dowel holes, ensuring simple installation using the same tools.
The height adjustment of the fixed point allows fine adjustment for adaptation to installed pipework and thus ensures the safe function of the fixed point.
The fixed point is suitable for holding the FFPC fixed point clamp and
FFRC cold fixed point clamp for even more flexibility.

Galvanised steel blue
Screws and nuts: Strength class 8
Thermal load capacity: -30 °C to +300 °C

Height adjustment possible
Mounting of the fixed point clamp. FFSC and FFRC cold anchor point clamp.
Alternating or unknown directions of force possible.
Recommended pipe dimension ≤ 168.3 mm.

The medium-weight fixed points in a compact and variable design prevent unwanted displacements between pipes and structures in hot or cold pipes and are suitable for aligning the thermally induced pipe expansion in the desired direction. The FFS-M fixed point saddle transfers the incoming forces reliably and directly into the structure and is height-adjustable. The FFP-M variable fixed points allow the suspension height to be adjusted to suit the pipe position and are braced on one or both sides with threaded rods. In addition to the FFPC fixed point clamp, the FFP-M and FFP-M2 can also accommodate the FFRC cold anchor point. The galvanised version is suitable for installations in buildings.