{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
threaded rods FIS IG, nut/washer, FIS IG M20 R
Article no.: 2095250
Catalog no.: 3907
Article code:
Product details
Technical Data
| With mortar cartridge | Nein | |
| Version | Filettatura interna | |
| Internal thread | M20 | |
| Professional / DIY | Profi | |
| Application conditions | predominantly static loads | |
| Material | Stainless steel | |
| Min. drill hole depth | 300 mm | |
| Material grade | Stainless steel | |
| Building material | Wood | |
| Packing | Folding box |
Identification & Classification
| Article number | 2095250 | |
| Catalog number | 3907 | |
| EAN / GTIN | 7610106972342 | |
| Manufacturer number | 573001 | |
| Article class | RMM |
Description
Advantage:
- In combination with the FIS EM Plus injection mortar, the internally threaded anchor is approved for anchoring in wood in accordance with abG and ETA.
- Available in galvanised and stainless steel versions in internal thread sizes M8 - M20 (external diameter M12 - M30), it can be used flexibly both indoors and outdoors.
- The flush finish of the internal thread solution enables safe component transport to the construction site without bending protruding anchor rods.
- The recommended fischer centring clips DD-E and DD-S allow ideal centring of the internally threaded anchors in the drill hole.
- The internally threaded anchor FIS IG allows the fixing point in timber to be removed and reused flush with the surface.
Application Area:
- Glulam and laminated beams made of spruce (Picea abies), fir (Abies alba) or pine (Pinus sylvestris)
- Prefabricated components for assembly on the construction site.
- Demountable and temporary fixings.
- Anchoring in wood, see national / European system approval for gluing into wood.
Application Notes:
- The internally threaded anchor FIS IG is suitable for pre-positioned installation in timber.
- The anchor is centred in the drill hole by attaching centring aids such as the fischer centring clips DD-E and DD-S.
- The fixing element is set by hand by slightly screwing it in until the anchor is countersunk flush with the surface.