{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Beveller handheld, Type: KFMV17-15F
Article no.: 2103233
Catalog no.: 078126
Article code:
Product details
Technical Data
| Cable length | 3.9 m | |
| Power consumption | 1’700 W | |
| Nominal voltage | 230 V | |
| Manufacturer’s designation | Kantenfräse handgeführt, Typ: KFMV17-15F | |
| Power supply | mains-powered | |
| Increments of milling depth adjustment | 0.1 mm | |
| Chamfer mill / beveller | yes | |
| Max. chamfer width | 21 mm | |
| Max. chamfer height | 15 mm | |
| Min. chamfer angle | 0 degrees | |
| Max. chamfer angle | 90 degrees | |
| Content | single part | |
| Type of product | milling machine | |
| Output power | 880 W | |
| Rated power | 1’700 W | |
| Min. no-load speed | 6’200 min-1 | |
| Max. no-load speed | 12’000 min-1 | |
| Extraction capability | yes | |
| Restart block | yes | |
| Soft start | yes | |
| Disc diameter | 100 mm | |
| Weight | 6.3 kg |
Identification & Classification
| Article number | 2103233 | |
| Catalog number | 078126 | |
| EAN / GTIN | 4061792261815 | |
| Manufacturer number | 601770500 | |
| Article class | 03D | |
| Manufacturer/responsible person | Metabowerke GmbH, Metabo-Allee 1, 72622 Nürtingen, Germany, www.metabo.com |
Description
Version:
Metal beveller for chamfer heights up to 15 mm for weld seam preparation.
One-touch controller. Patented, tool-free milling depth adjustment in 0.1 mm increments. Locking points for short setting times, to prevent unwanted adjustment of the milling depth when working. Precise adjustment of the bevel angle directly via the guide plates. Universal milling head with three carbide inserts for all bevel angles from 0 – 90°. Controlled working by means of large-area guide plates. Stop roller for guiding pipes for easy weld seam preparation. Loop handle which can be adjustable without using tools for safe and even guidance. Metabo Marathon motor with patented dust protection to ensure a long service life. Vario-Constamatic (VC) full-wave electronics with adjustment wheel, for working with material-appropriate speeds that remain virtually constant under load. Electronic overload protection, soft start and restart protection. User is protected by means of side plates to divert the chips. With metaBOX, the intelligent solution for transport and storage, illustration representative.
For producing chamfers and radii on flat materials, sheet metal and containers, internal and external edges, contour profiles and for rounding off holes.
- Tool-free setting of the cutting depth in 0.1 mm steps. (From 0 mm – 15 mm)
- Precise adjustment of the chamfer angle.
- Controlled working by means of large-scale guide plates.
- Electronic overload protection, soft start and restart protection.
One-touch controller. Patented, tool-free milling depth adjustment in 0.1 mm increments. Locking points for short setting times, to prevent unwanted adjustment of the milling depth when working. Precise adjustment of the bevel angle directly via the guide plates. Universal milling head with three carbide inserts for all bevel angles from 0 – 90°. Controlled working by means of large-area guide plates. Stop roller for guiding pipes for easy weld seam preparation. Loop handle which can be adjustable without using tools for safe and even guidance. Metabo Marathon motor with patented dust protection to ensure a long service life. Vario-Constamatic (VC) full-wave electronics with adjustment wheel, for working with material-appropriate speeds that remain virtually constant under load. Electronic overload protection, soft start and restart protection. User is protected by means of side plates to divert the chips. With metaBOX, the intelligent solution for transport and storage, illustration representative.
For producing chamfers and radii on flat materials, sheet metal and containers, internal and external edges, contour profiles and for rounding off holes.
Supplied with:
3 universal carbide inserts, stop roller, bridge handle and metaBOX 185 L.