{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Master TM plain shank thread mill, AlTiN, NPT: 1/16-27
Article no.: 2104802
Catalog no.: 139739
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Series | Master TM | |
| Wet maximum | suitable | |
| Manufacturer’s designation | GARANT Master TM Schaft-Gewindefraeer, AlTiN | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Holder shape | plain shank | |
| Holder version | metric | |
| Holder size, metric | 6 mm | |
| Dry machining | suitable only under restricted conditions | |
| Holder tolerance class | h6 | |
| Shank diameter | 6 mm | |
| Shank length | 39.3 mm | |
| Oil | suitable | |
| Shank type | HA | |
| Air | suitable only under restricted conditions | |
| Tool material | solid carbide | |
| Coating | AlTiN | |
| Cutter diameter | 5.39 mm | |
| Cutting edge length | 8.93 mm | |
| Thread type | NPT | |
| Thread pitch | 0.941 mm | |
| Turns per inch | 27 | |
| Thread nominal diameter, fraction | 1/16 | |
| Number of effective cutters, peripheral side | 4 | |
| Twist direction | right-hand | |
| Corner / edge | 1 | |
| Corner version | sharp-edged | |
| Spacing of the cutters | unequal spacing | |
| Application for type of drilling | for blind hole and through hole | |
| Flank angle | 60 degrees | |
| Number of clamping slots | 4 | |
| Taper ratio | 1:16 | |
| Internal/external application | internal | |
| Full profile | yes | |
| Interface | joint 1 | |
| Overall length | 58 mm | |
| Functional length | 8.93 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | ANSI B 1.20.1 | |
| Machining method | spiral milling (thread milling) | |
| Colour ring | green | |
| Type of product | thread mill |
Identification & Classification
| Article number | 2104802 | |
| Catalog number | 139739 | |
| EAN / GTIN | 4067263126966 | |
| Manufacturer number | 139739 1/16-27 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
220
N
220
N
180
P
140
P
130
P
120
P
90
P
80
H
45
H
85
H
50
M
82
M
75
S
50
K
120
N
200
Description
Version:
Solid carbide thread milling cutters with irregular cutting edge spacing and an increased number of cutting edges. Due to the irregular cutting edge spacing they achieve very smooth running and long tool life.
Newly developed universal geometry and high-performance coating for use across a wide spectrum of materials.
Newly developed universal geometry and high-performance coating for use across a wide spectrum of materials.
- Significantly reduced vibration due to irregular cutting edge spacing.
- Increased number of cutting edges.
- The latest generation of AlTiN-based HiPIMS coating.
- Corrected thread profile for avoidance of profile distortions.
Application:
Tapered pipe threads (NPT) to ANSI B1.20.1, for threads with sealants.