{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Diabolo solid carbide end cutting thread mill 2×D, TiAlN, G: G1/8
Article no.: 2104966
Catalog no.: 139527
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Holder version | metric | |
| Holder size, metric | 0100 mm | |
| Dry machining | unsuitable | |
| Holder tolerance class | h6 | |
| Shank diameter DS | 10 mm | |
| Shank length LS | 47.6 mm | |
| Oil | suitable | |
| Shank type | HA | |
| Air | suitable only under restricted conditions | |
| Tool material | solid carbide | |
| Coating | TiAlN | |
| Cutter diameter Dc | 7.3 mm | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance class | h6 | |
| Recess diameter D1 | 5.9 mm | |
| Cutting edge length Lc | 3.2 mm | |
| Thread type | BSP / G | |
| Thread pitch | 0.907 mm | |
| Turns per inch | 28 | |
| Thread nominal diameter fraction | 1/8 | |
| Number of effective cutters (peripheral side) Z | 4 | |
| Number of effective cutters (end face) Z | 4 | |
| Corner / edge | 1 | |
| Corner version | sharp-edged | |
| Spacing of the cutters | the same | |
| Application for type of drilling | up to 2×D for blind holes and through holes | |
| Flank angle | 55 degrees | |
| Number of clamping slots | 4 | |
| Countersink angle | 90 degrees | |
| Internal/external application | internal | |
| Full profile | yes | |
| Interface | joint 1 | |
| Gauge length A | 22 mm | |
| Usable length L1 | 22 mm | |
| Overall length L | 72 mm | |
| Functional length | 24.4 mm | |
| Cutting direction | left-hand cutting | |
| Tool version | solid carbide | |
| Standard | DIN ISO 228/1 | |
| Machining method | drilling into solid material (BVB); thread processing internal (EGI) | |
| Type of product | thread mill |
Identification & Classification
| Article number | 2104966 | |
| Catalog number | 139527 | |
| EAN / GTIN | 4067263118060 | |
| Manufacturer number | 139527 G1/8 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
90
P
90
H
45
H
40
H
35
M
60
M
60
S
45
Description
Version:
Tool for combined production of bore, chamfer and thread in a single work step. Pre-drilling is no longer required. The innovative centre cutting edge geometry makes this tool a specialist in thread production in hardened and hard-to-machine materials. The TiAIN high-performance coating ensures the longest possible tool life, especially in hardened steels up to 63 HRC. All tools have left-hand cutting and are suitable for right-hand and left-hand threads.
Application:
For Whitworth parallel pipe threads DIN-ISO 228/1 (threads that do not form a seal within the connections).