{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling SOMT....20ER-GM, for high feed rate indexable face mills, PR1825
Article no.: 2105017
Catalog no.: 222071
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | SOMT....20ER-GM | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Base form | square | |
| Thickness of the insert S | 4.58 mm | |
| Length of cutting insert L | 10.3 mm | |
| Insert version | right-hand | |
| Length of cutting edge l | 10.3 mm | |
| Height of cutting edge | 4.58 mm | |
| Diameter of the cutting insert d | 10.3 mm | |
| Corner radius R | 2 mm | |
| Corner angle | 90 degrees | |
| Rake face chamfer width C | 0 mm | |
| Rake face chamfer angle | 0 degrees | |
| Setting angle | 10 degrees | |
| Normal clearance angle (main cutting edge) | 16 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 16 degrees | |
| Cutting conditions | continuous | |
| ISO-Code | SOMT100420ER-GM | |
| Attachment hole diameter | 4.6 mm | |
| Tool material | HC-P25 | |
| Standard designation for cutting medium, 2nd Priority | Carbide | |
| Machining group, manufacturer-specific | HOG | |
| Machining group | P (steel) | |
| Tool application group | HOG | |
| Cutting media, manufacturer’s designation | PR1825 | |
| Coating | Megacoat Nano | |
| Insert thickness T | 4.58 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | SOMT....20ER-GM | |
| Insert designation | SOMT100420ER | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | steel (P) | |
| Tolerance Class | M | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | no | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | continuous | |
| Weight | 2 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 2105017 | |
| Catalog number | 222071 | |
| EAN / GTIN | 4960664028511 | |
| Manufacturer number | SOMT100420ER-GMPR1825 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
P
200
P
180
P
160
P
140
P
100
Description
Version:
4-edge indexable inserts with convex cutting edges for low cutting forces.
Application:
FL geometry is the first choice for general machining.
Note:
Standard application values for ae = 0.3×D.