{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT MasterSteelHT high-precision countersink with unequal spacing and 3 drive flats 90°, TiAlN, External ⌀ Dc: 8mm
Article no.: 2105039
Catalog no.: 150352
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Feed f | 0.08 mm/rev. | |
| Wet maximum | suitable | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL00065005 | |
| Holder version | metric | |
| Holder size, metric | 6 mm | |
| Dry machining | suitable only under restricted conditions | |
| Holder tolerance class | h9 | |
| Diameter of shaft DS | 6 mm | |
| Length of shank LS | 40 mm | |
| Oil | suitable only under restricted conditions | |
| Cooling lubricant | yes | |
| Series | Master Steel | |
| Manufacturer’s designation | GARANT MasterSteel HT Präzisions-Kegelsenker mit Ungleichteilung und 3 Spannflächen 90° | |
| Cutter diameter, min. Dc min. | 2 mm | |
| Cutter diameter, max. Dc max. | 8 mm | |
| Configurable | no | |
| Tolerance of cutter diameter | manufacturer tolerance | |
| For hole diameter d | 2.5 mm | |
| Flute length Lc | 7.5 mm | |
| Taper length | 3 mm | |
| Number of teeth Z | 3 | |
| Twist direction | right-hand | |
| Angle, 1st step | 90 degrees | |
| Pilot pin | without guiding pin | |
| Guide elements | without guide elements | |
| Spacing of the countersink cutting edges | unequal spacing | |
| Tool material | HSS-E | |
| Machining group | K (cast iron); P (steel) | |
| Cutting media, manufacturer’s designation | HSCO | |
| Coating | TiAlN | |
| Interface | joint 1 | |
| Overall length L | 50 mm | |
| Functional length | 50 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 335 C | |
| Shape letter standard number | C | |
| Data carriers | without data carrier | |
| Machining method | profile countersinking (SPR) | |
| Colour ring | red | |
| Type of product | countersink | |
| Feed in | steel < 1400 N/mm2 | |
| Content | single part |
Identification & Classification
| Article number | 2105039 | |
| Catalog number | 150352 | |
| EAN / GTIN | 4067263125433 | |
| Manufacturer number | 150352 8 | |
| Article class | 15B | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
72
N
58
P
42
P
35
P
31
P
19
P
15
H
14
H
13
H
10
M
17
M
13
S
10
K
29
Description
Version:
Countersinks with 3 convex unequally spaced cutting edges for chatter-free countersinking and deburring. Robust design and special geometry with variable pitch of the spiral cutting edges for the highest demands – even in difficult-to-machine materials such as Toolox 44 and Hardox 500. Significantly reduced radial and axial forces. Manufactured with narrower production tolerances than specified by DIN335-C.
Advantage:
High self-guidance and stability due to the convex cutting edge geometry. Chatter-free running for excellent results with long tool life at the same time.
Application:
High-precision countersinks for production of exactly round 90° countersunk surfaces in steel, cast iron and materials that are challenging to machine. Exceptionally well suited for use on hand-held power drills and single-pillar drilling machines. Not to be used on laser-cut holes.