{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Master Alu SlotMachine solid carbide roughing end mill HPC, DLC, ⌀ e8 DC: 4mm
Article no.: 2105041
Catalog no.: 205251
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Wet minimum | suitable only under restricted conditions | |
| Vorschub pro Zahn Besäumen fz | 0.06 mm | |
| Max. cutting depth, Full slot milling | 2 mm | |
| Max. cutting depth, Side milling | 8 mm | |
| Wet maximum | suitable | |
| Vorschub pro Zahn Nutenfräsen fz | 0.04 mm | |
| Eingriffsbreite max. ae | 1×D; 0,5×D | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL00601005 | |
| Holder version | metric | |
| Holder size, metric | 6 mm | |
| Dry machining | suitable only under restricted conditions | |
| Holder tolerance class | h6 | |
| Shank diameter DS | 6 mm | |
| Length of shank LS | 43.8 mm | |
| Shank type | HB | |
| Air | suitable | |
| Cooling lubricant | yes | |
| Series | Master Alu | |
| Manufacturer’s designation | GARANT Master Alu SlotMachine VHM-Schruppfräser | |
| Tool material | solid carbide | |
| Machining group, manufacturer-specific | N | |
| Machining group | N (non-ferrous metals) | |
| Cutter diameter Dc | 4 mm | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance class | e8 | |
| Cutting edge length Lc | 8 mm | |
| Balancing quality | G 2,5 | |
| Plunge angle | 45 degrees | |
| Number of effective cutters (peripheral side) Z | 3 | |
| Number of effective cutters (end face) Z | 3 | |
| Twist direction | right-hand | |
| Twist angle | 35 degrees | |
| Number of corner versions | 1 | |
| Corner / edge | 1 | |
| Corner version | as radius | |
| Corner radius R | 0.1 mm | |
| Shape identifier, manufacturer-specific | WR | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Number of clamping slots | 3 | |
| Helix angle characteristic | unequal spacing | |
| Cutting media, manufacturer’s designation | VHM | |
| Vorschub pro Zahn in | alu short-chipping | |
| Coating | DLC | |
| Interface | joint 1 | |
| Usable length L1 | 10.5 mm | |
| Functional length | 39 mm | |
| Max. speed | 45’000 min-1 | |
| Weight | 20 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | DIN 6527 | |
| Data carriers | without data carrier | |
| Machining method | circular milling (round milling) (FZI); countersinking (plunge milling) (FSE); hobbing (FWA); shoulder milling (FEC); slot milling (FNU) | |
| Colour ring | yellow | |
| Machining strategy | HPC | |
| Type of product | shoulder mill | |
| Content | single part | |
| Correction factor fz | 3 | |
| Cutting depth min. | 0.2 mm | |
| Cutting depth in use | Full slot milling; Side milling |
Identification & Classification
| Article number | 2105041 | |
| Catalog number | 205251 | |
| EAN / GTIN | 4067263130352 | |
| Manufacturer number | 205251 4 | |
| Article class | 11X | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
450
N
400
N
380
N
120
N
100
N
160
N
200
Description
Version:
For roughing. Special profile for machining non-ferrous metals.
Advantage:
Optimised flute form, eccentric relief ground, generous chip spaces.
Up to 2 × D into solid material at very high feed rates and smooth cutting action.
Ramping capability up to 45°.
Very high feed rates when plunging vertically, thanks to special plunging geometry.
Up to 2 × D into solid material at very high feed rates and smooth cutting action.
Ramping capability up to 45°.
Very high feed rates when plunging vertically, thanks to special plunging geometry.