{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Insert width 4 mm, for side milling cutters and grooving tools, Tungsten carbide
Article no.: 2105055
Catalog no.: 218484
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | ALU | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Blade thickness | 4 mm | |
| Insert length | 10.7 mm | |
| Insert version | neutral | |
| Corner radius, right | 2 mm | |
| Corner chamfer angle, right | 0 degrees | |
| Corner chamfer angle, left | 0 degrees | |
| Rake face chamfer width | 0 mm | |
| Rake face chamfer angle | 0 degrees | |
| Groove width | 4 mm | |
| Tip chamfer | 0 mm | |
| Tip radius | 0 mm | |
| Attachment hole diameter | 3.8 mm | |
| Tool material | Carbide | |
| Machining group, manufacturer-specific | 0 | |
| Machining group | N (non-ferrous metals) | |
| Tool application group | 0 | |
| Cutting media, manufacturer’s designation | HU7810 | |
| Coating | uncoated | |
| Grade | HU7810 | |
| Insert thickness | 4 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Type of product | grooving insert | |
| With ISO code | no | |
| Number of teeth | 1 pcs. | |
| Direction of action | neutral | |
| Suitable for material | Aluminium | |
| Machining method | plunging (ESE) | |
| Finishing / roughing assignment | Finishing | |
| Type of fastening | Hole | |
| Chip breaker | no | |
| Cutter version | rounded (E) | |
| Weight | 10 g | |
| Content | 1 pcs. | |
| Correction factor fz | 1.5 |
Identification & Classification
| Article number | 2105055 | |
| Catalog number | 218484 | |
| EAN / GTIN | 4067263116547 | |
| Manufacturer number | 218484 ALU | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
530
N
495
N
415
Description
Note:
Standard application values for ae max.
Suitable for side/parting off milling cutters ap= 3.1 mm.
Suitable for side/parting off milling cutters ap= 3.1 mm.