{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling LPGT 010210 ER-GM, for high feed rate indexable face mills, PR1825
Article no.: 2105095
Catalog no.: 221945
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Base form | rectangular | |
| Wide insert | 4.19 mm | |
| Thickness of the insert | 2.19 mm | |
| Length of cutting insert | 6.26 mm | |
| Insert version | right-hand | |
| Length of cutting edge | 6.26 mm | |
| Height of cutting edge | 2.19 mm | |
| Corner radius | 1 mm | |
| Corner chamfer length | 0 mm | |
| Corner chamfer angle | 0 degrees | |
| Corner angle | 90 degrees | |
| Rake face chamfer width | 0 mm | |
| Rake face chamfer angle | 0 degrees | |
| Rake angle | 5 degrees | |
| Setting angle | 90 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 16 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| Normal clearance angle, main cutting edge | 11 degrees | |
| Cutting conditions | continuous | |
| ISO-Code | LPGT 010210 ER-GM | |
| Attachment hole diameter | 2.1 mm | |
| Type of chip breaker | GM | |
| Tool material | HC-P25 | |
| Machining group | K (cast iron); M (stainless steel); P (steel) | |
| Tool application group | HOG | |
| Cutting media, manufacturer’s designation | PR1825 | |
| Coating | Megacoat Nano | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | LP0102103R | |
| Interface coding for insert according to ISO TS 13399-60 | LP0102103R | |
| Insert designation | LPGT010210 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 2 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | cast iron (K); stainless steel (M); steel (P) | |
| Tolerance Class | G | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Machining strategy | HPC | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | continuous | |
| Number of potential uses | 2 pcs. | |
| Weight | 1 g | |
| Content | 10 pcs. | |
| Correction factor | 2.5 |
Identification & Classification
| Article number | 2105095 | |
| Catalog number | 221945 | |
| EAN / GTIN | 4960664028573 | |
| Manufacturer number | LPGT010210ER-GMPR1825 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
P
200
P
180
P
160
P
140
P
100
K
180
Description
Version:
2-edge indexable insert.
Note:
Standard application values for ae = 0.3×D / ap = 0.3 mm.