{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling LOGU 030310 ER-GM, for high feed rate indexable face mills, PR1825
Article no.: 2105109
Catalog no.: 221971
Article code:
Product details
Technical Data
| Max. cutting depth ap | 1 mm; 1 mm | |
| Wet maximum | suitable only under restricted conditions | |
| Dry machining | suitable | |
| Air | suitable | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | LOGU 030310 ER-GM | |
| Base form | rectangular | |
| Thickness of insert S | 3.18 mm | |
| Insert version | right-hand | |
| Corner radius R | 1 mm | |
| Corner angle | 90 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| ISO-Code | LOGU 030310 ER-GM | |
| Attachment hole diameter | 3.45 mm | |
| Type of chip breaker | GM | |
| Cutting depth ap, min. | 0.1 mm | |
| Cutting depth ap, max. | 1 mm | |
| Cutting depth in use | Full slot milling; Side milling | |
| Feed rate per tooth min. fz | 0.2 mm | |
| Feed rate per tooth max. fz | 1.5 mm | |
| Tool material | Carbide | |
| Machining group | P (steel) | |
| Cutting media, manufacturer’s designation | PR1825 | |
| Coating | PVD | |
| Grade | PR1825 | |
| Insert thickness T | 3.96 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Insert designation | LOGU 030310 ER-GM | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Number of teeth | 4 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | steel (P) | |
| Tolerance Class | G | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Number of potential uses | 4 pcs. | |
| Content | single part | |
| Correction factor fz | 2.5 |
Packaging units
| 1 Carton | 10 pieces |
Identification & Classification
| Article number | 2105109 | |
| Catalog number | 221971 | |
| EAN / GTIN | 4960664028597 | |
| Manufacturer number | TLT00110 | |
| Article class | 25A | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
P
200
P
180
P
160
P
140
P
100
Description
Version:
Double-sided indexable insert with 4 cutting edges. The convex cutting edge version of the insert ensures gentle entry of the cutting edge into the material.
Note:
Standard application values for ae = 0.3×D / ap max = 1 mm.
Downloads & documents
Suitable products
Services & product advisors
More search terms & categories
Tool material:
Carbide
Coating:
PVD
Type of product:
cutter insert
Category:
Indexable inserts for longitudinal turning tools & face turning tools
Category:
Indexable inserts for side milling cutters & parting off milling cutters
Category:
Indexable inserts for grooving tools
Category:
Indexable inserts for high feed rate milling cutter
Brand:
KYOCERA