{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for turning CNMG 120408, for roughing machining
Article no.: 2105115
Catalog no.: 250371
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | CNMG120408PH CA115P | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | rhombic | |
| Width of insert B | 12.9 mm | |
| Thickness of insert S | 4.76 mm | |
| Length of insert L | 12.9 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 12.9 mm | |
| Height of cutting edge | 4.76 mm | |
| Diameter of insert d | 12.7 mm | |
| Corner radius R | 0.8 mm | |
| Corner angle | 80 degrees | |
| Rake face chamfer width C | 0 mm | |
| Rake face chamfer angle | 0 degrees | |
| Rake angle | 20 degrees | |
| Setting angle | 0 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| ISO-Code | CNMG 120408 | |
| Attachment hole diameter | 5.16 mm | |
| Type of chip breaker | PH | |
| Machining group | P (steel) | |
| Tool application group | P10-P30 | |
| Cutting media, manufacturer’s designation | CA115P | |
| Coating | CVD | |
| Insert thickness T | 4.76 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | CN1204082N | |
| Interface coding for insert according to ISO TS 13399-60 | CN1204082N | |
| Insert designation | CNMG120408 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | neutral | |
| Suitable for material | steel (P) | |
| Tolerance Class | M | |
| Finishing / roughing assignment | Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Cutting conditions | continuous | |
| Number of potential uses | 4 pcs. | |
| Weight | 10 g | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 2105115 | |
| Catalog number | 250371 | |
| EAN / GTIN | 4960664042692 | |
| Manufacturer number | TML00098 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
P
P
P
P
P
