{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling SPMT 1806 EDER-NB2, for face mills / end mills, PR1835
Article no.: 2105164
Catalog no.: 224012
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | SPMT 1806 EDER-NB2 | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Base form | square | |
| Width of insert B | 18 mm | |
| Thickness of insert S | 6.35 mm | |
| Length of insert L | 18 mm | |
| Insert version | right-hand | |
| Length of cutting edge l | 18 mm | |
| Height of cutting edge | 6.35 mm | |
| Diameter of insert d | 18 mm | |
| Corner radius R | 0 mm | |
| Corner chamfer length C | 1.2 mm | |
| Corner chamfer angle | 75 degrees | |
| Corner angle | 90 degrees | |
| Rake face chamfer width C | 3 mm | |
| Rake face chamfer angle | 4 degrees | |
| Rake angle | 90 degrees | |
| Setting angle | 11 degrees | |
| Normal clearance angle (main cutting edge) | 11 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| Normal clearance angle, main cutting edge | 11 degrees | |
| Cutting conditions | continuous | |
| ISO-Code | SPMT 1806 EDER-NB2 | |
| Attachment hole diameter | 6.8 mm | |
| Wiper length axial Lwa | 0 mm | |
| Wiper length radial Lwr | 3.1 mm | |
| Tool material | HC-P35 | |
| Machining group | P (steel) | |
| Tool application group | P35 | |
| Cutting media, manufacturer’s designation | PR1835 | |
| Coating | Megacoat Nano | |
| Insert thickness T | 6.35 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | SPMT 1806 EDER-NB2 | |
| Interface coding for insert according to ISO TS 13399-60 | SPMT1806EDER | |
| Insert designation | SPMT1806EDER | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | steel (P) | |
| Tolerance Class | M | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | chamfered and rounded (S) | |
| Cutting conditions | continuous | |
| Number of potential uses | 4 pcs. | |
| Weight | 19 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 2105164 | |
| Catalog number | 224012 | |
| EAN / GTIN | 4960664030071 | |
| Manufacturer number | TLU00161 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
P
200
P
180
P
180
P
160
P
160
Description
Version:
Special indexable insert geometry ensures reduced cutting forces and improved chip breaking. All types with wiper cutters for high feed rates.
Application:
NB2 / NB3: General application
Note:
The milling cutters are alternately equipped with equal numbers of indexable inserts of forms NB2 and NB3. Comply with the assignment instructions on the cutter.
Standard application values for ae = 1×D.
Standard application values for ae = 1×D.