{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for turning CNMM 190612, for coarse machining
Article no.: 2105284
Catalog no.: 250503
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | CNMM190612PX CA125P | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | rhombic | |
| Wide insert B | 19.3 mm | |
| Thickness of the insert S | 6.35 mm | |
| Length of cutting insert L | 19.3 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 19.3 mm | |
| Diameter of the cutting insert d | 19.05 mm | |
| Corner radius R | 1.2 mm | |
| Corner angle | 80 degrees | |
| Rake face chamfer width C | 0 mm | |
| Rake face chamfer angle | 0 degrees | |
| Rake angle | 22 degrees | |
| Setting angle | 0 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| ISO-Code | CNMM 190612 | |
| Attachment hole diameter | 7.94 mm | |
| Type of chip breaker | PX | |
| Tool material | HC-P20 | |
| Machining group | P (steel) | |
| Tool application group | P25 | |
| Cutting media, manufacturer’s designation | CA125P | |
| Coating | CVD | |
| Insert thickness T | 6.35 mm | |
| Type of fastening for insert | M (with cyl. hole clamped from above and via the hole) | |
| Interface coding for insert | CNMM190612 | |
| Interface coding for insert according to ISO TS 13399-60 | CN1906122N | |
| Insert designation | CNMM190612 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | neutral | |
| Suitable for material | steel (P) | |
| Tolerance Class | M | |
| Finishing / roughing assignment | Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Cutting conditions | interrupted | |
| Number of potential uses | 2 pcs. | |
| Weight | 30 g | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 2105284 | |
| Catalog number | 250503 | |
| EAN / GTIN | 4960664014835 | |
| Manufacturer number | CNMM190612PX | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
P
P
P
P
P
M
M
