{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for turning SNMG 120408, for roughing machining
Article no.: 2105312
Catalog no.: 251356
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | SNMG 120408-PH CA115P | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | square | |
| Insert width | 12.7 mm | |
| Blade thickness | 4.76 mm | |
| Insert length | 12.7 mm | |
| Insert version | neutral | |
| Cutting edge length | 12.7 mm | |
| Cutting edge height | 4.76 mm | |
| Insert diameter | 12.7 mm | |
| Corner radius | 0.8 mm | |
| Corner angle | 90 degrees | |
| Rake face chamfer width | 0 mm | |
| Rake face chamfer angle | 0 degrees | |
| Rake angle | 20 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| ISO-Code | SNMG 120408 | |
| Attachment hole diameter | 5.16 mm | |
| Type of chip breaker | PH | |
| Machining group | P (steel) | |
| Tool application group | P10-P30 | |
| Cutting media, manufacturer’s designation | CA115P | |
| Coating | TiCN | |
| Grade | CA515 | |
| Insert thickness | 4.76 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | SN1204082N | |
| Interface coding for insert according to ISO TS 13399-60 | SN1204082N | |
| Insert designation | SNMG120408 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 8 pcs. | |
| Direction of action | neutral | |
| Suitable for material | steel (P) | |
| Tolerance Class | M | |
| Finishing / roughing assignment | Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Cutting conditions | continuous | |
| Number of potential uses | 8 pcs. | |
| Weight | 10 g | |
| Content | 10 pcs. |
Identification & Classification
| Article number | 2105312 | |
| Catalog number | 251356 | |
| EAN / GTIN | 4960664041145 | |
| Manufacturer number | SNMG120408PH | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
P
P
P
P
P
