{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Shrink-fit chuck, PSC 32 short, Clamping ⌀ D1: 6mm
Article no.: 2105673
Catalog no.: 308559
Article code:
Product details
Technical Data
| Through-coolant | yes, with max. 50 bar | |
| Coolant hole can be plugged | yes | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, axially concentric | |
| Cooling lubricant | yes | |
| Holder type | polygonal hollow shank taper with flat surface contact | |
| Holder version | dimensionless nominal size without cooling | |
| Holder size, no dimensions | 32 | |
| Type of mounting | spigot | |
| Interface on machine side | PSC 32 | |
| Min. clamping diameter D1 | 6 mm | |
| Max. clamping diameter D1 | 12 mm | |
| Gauge length A | 65 mm | |
| Outer diameter on the tool side D | 21 mm | |
| Max. speed | 25’000 min-1 | |
| Concentricity | 3 µm | |
| Balance quality G at rotational speed | g 2.5 at 25,000 rpm | |
| Machining strategy | HPC; HSC | |
| Format | short | |
| Vibration damping | no | |
| Tool pull-out protection | no | |
| Pendular compensation | no | |
| Incl. RFID data carrier | no | |
| With cooling channel bore | yes | |
| Coolant channel bore can be plugged | yes | |
| Interface | joint 1; joint 2 | |
| Type of product | shrink-fit chuck | |
| Overall length L | 84 mm | |
| Overall height H1 | 27 mm | |
| Overall width B1 | 27 mm | |
| Standard | ISO 26623-1 | |
| With hole for RFID data carrier | yes | |
| Through-coolant available | yes | |
| Material | heat-treatable steel | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 2105673 | |
| Catalog number | 308559 | |
| EAN / GTIN | 4067263110040 | |
| Manufacturer number | 308559 6 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- With RFID/Balluffchip bore.
- All shanks hard turned (for smooth running!).
- Mating faces of the PSC internal contour machined.
With lockable threads.
Application:
For clamping tools with shank tolerance h6.