{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Centring vice, base unit Xtric, Type: 125XSPA
Article no.: 2105733
Catalog no.: 363000
Article code:
Product details
Technical Data
| Series | Xtric | |
| Min. overall length | 186 mm | |
| Overall width | 120 mm | |
| Overall height | 54 mm | |
| Interchangeable jaws | yes | |
| Clamping force selection | maximum clamping force | |
| Clamping force | 32 kN | |
| Maximum torque | 132 Nm | |
| Tenon slots | longitudinal slot; no slot | |
| With bore | yes | |
| Pitch | 80 | |
| With width across flats | yes | |
| Width across flats | 13 mm; 5 mm | |
| Pivoting jaw | no | |
| Version | mechanical; zero-point clamping system | |
| Weight | 10.6 kg | |
| Surface | hardened; precision milled | |
| Accuracy | 0.01 mm | |
| Type of product | machine vice |
Identification & Classification
| Article number | 2105733 | |
| Catalog number | 363000 | |
| EAN / GTIN | 4067263101109 | |
| Manufacturer number | 363000 125XSPA | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- Central alignment delivers perfectly centred clamping.
- The clamping range can be changed by reversing the jaws.
Application:
Perfect for 5-face machining. Centred clamping.
Suitable for:
Supplied with:
Base body, spindle, spindle nuts and four clamping studs suitable for automation extension base No. 360164 XP80Z.
Optional extras:
Torque wrench No. 656050, socket No. 642229 13, assembly station No. 358595 52/96 or No. 358595 80.
Flexible pin jaw, rigid, No. 363050 125. Flexible pin jaw, movable, No. 363051 125.
Flexible pin jaw, rigid, No. 363050 125. Flexible pin jaw, movable, No. 363051 125.
Note:
Suitable for the GARANT TurnTable automation system in combination with / for automation extension base No. 360164 XP80Z. Suitable top jaws No. 363010 – 363045 are not included in the scope of supply. Clamping situation S2 arises by reversing the jaws.
Warning:
Intended use
Reasonably foreseeable misuse
- Clamping device for mounting on a machine intended to perform milling operations.
- For clamping workpieces in the blank or partially machined state.
- Adaptation to workpiece geometry is possible through various designs and attachment jaws.
- Use only when correctly assembled and with safety devices and guards on the machine fully operational.
Reasonably foreseeable misuse
- Do not use the centring vice for turning work.
- Do not clamp the centring vice at the clamping edge.
- Do not mount components not in accordance with the specification.
- Do not make any unauthorised modifications.
- Do not use in explosion hazard areas.