{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Cable cutter with 2-component grips VDE insulated, overall length: 225mm
Article no.: 2105815
Catalog no.: 730350
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Front cutting edge for step-by-step cutting (“nibbling”) of very large cables.
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Product details
Technical Data
| Tested up to | 1’000 V | |
| Colour, red | Signal red | |
| Colour, yellow | Signal yellow | |
| Part described, Signal red | Griffhülse oben | |
| Part described, Signal yellow | Griffhülse unten | |
| Quality and test seal | VDE | |
| ESD protected area (EPA) | no | |
| Colour | yellow; red | |
| Type of product | cable cutters | |
| Cutter shape | curved | |
| Cutting capacity | 120 mm2 | |
| Scissors features | mechanical; one-hand; protection against trapping fingers | |
| Suitable for diameter | cable (external diameter) | |
| Max. diameter, cable (external diameter) | 23 mm | |
| Suitable for cross-section | Al cable; Cu cable, multi-wired; individual cores | |
| Max. cross-section | 35 mm2; 70 mm2; 35 mm2 | |
| Handle feature | 2-component handle | |
| Standard | DIN EN IEC 60900 / VDE 0682-201 | |
| Material | special tool steel | |
| Surface | burnished | |
| Overall length | 225 mm | |
| Material of handle | plastic | |
| Content | single part |
Identification & Classification
| Article number | 2105815 | |
| Catalog number | 730350 | |
| EAN / GTIN | 4003773089964 | |
| Manufacturer number | 95 18 225 | |
| Article class | 73F | |
| Manufacturer/responsible person | KNIPEX-Werk C. Gustav Putsch KG, Oberkamper Straße 13, 42349 Wuppertal, Germany, www.knipex.de |
Description
Version:
Head with sickle-shaped blades. Scissors gunmetal finish. Cuts smoothly and cleanly without crushing. Two cutting areas: The stepped main cutting edge keeps smaller and larger cables close to the scissors at all times so that they do not slip during cutting; the front cutting edge is used for step-by-step cutting (“nibbling”) of very large cables. Enormous capacity: cuts single-stranded copper or aluminium cables up to 35 mm², multi-stranded cables up to 70 mm² and fine-stranded cables up to 120 mm².
Application:
For cutting copper and aluminium cables.
Material:
Special tool steel, drop-forged.