{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Roughing end mill HSS-PM, TiAlN, ⌀ DC: 15mm
Article no.: 210617
Catalog no.: 192860
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Max. cutting depth, Full slot milling | 26 mm | |
| Max. cutting depth, Side milling | 26 mm | |
| Wet maximum | suitable | |
| Vorschub pro Zahn Nutenfräsen fz | 0.033 mm | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL01201005 | |
| Holder shape | straight clamping flat | |
| Holder version | metric | |
| Holder size, metric | 12 mm | |
| Dry machining | suitable | |
| Holder tolerance class | h6 | |
| Shank diameter DS | 12 mm | |
| Length of shank LS | 55.95 mm | |
| Shank type | HB | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | Schruppfräser HSS-PM, TiAlN | |
| Tool material | HSS-E-PM | |
| Machining group | K (cast iron); M (stainless steel); N (non-ferrous metals); P (steel) | |
| Cutter diameter Dc | 15 mm | |
| Tolerance of cutter diameter | manufacturer tolerance | |
| Upper dimension | 0.12 mm | |
| Lower dimension | -0.12 mm | |
| Cutting edge length Lc | 26 mm | |
| Number of effective cutters (peripheral side) Z | 5 | |
| Twist direction | right-hand | |
| Twist angle | 30 degrees | |
| Number of corner versions | 1 | |
| Corner / edge | 1 | |
| Corner version | as chamfer | |
| Corner chamfer width | 0.3 mm | |
| Corner chamfer angle | 45 degrees | |
| Shape identifier, manufacturer-specific | HR | |
| Direction of infeed | horizontal, oblique and vertical | |
| Number of clamping slots | 5 | |
| Cutting media, manufacturer’s designation | HSS-PM | |
| Vorschub pro Zahn in | steel < 900 N/mm2 | |
| Coating | TiAlN | |
| Interface | joint 1 | |
| Overall length L | 83 mm | |
| Functional length | 26 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 844 | |
| Machining method | countersinking (plunge milling) (FSE); shoulder milling (FEC); slot milling (FNU) | |
| Colour ring | green | |
| Type of product | shoulder mill | |
| Content | single part | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.3 mm | |
| Cutting depth in use | Full slot milling; Side milling |
Identification & Classification
| Article number | 210617 | |
| Catalog number | 192860 | |
| EAN / GTIN | 4045197108524 | |
| Manufacturer number | 192860 15 | |
| Article class | 11W | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
138
P
83
P
64
P
64
P
37
P
32
M
23
M
18
K
55
N
110
Description
Version:
Relief ground fine pitch knuckle form profile.
Centre cutting teeth for plunging.
Size 6M to 25M − MID mills: Dimensions to manufacturer’s standard,which is between DIN 844 stub and DIN 844 long.
Centre cutting teeth for plunging.
Size 6M to 25M − MID mills: Dimensions to manufacturer’s standard,which is between DIN 844 stub and DIN 844 long.