{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Value pack GARANT Master Steel SlotMachine solid carbide roughing end mill HPC, 5 pieces
Article no.: 2109914
Catalog no.: GG1050
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Series | Master Steel | |
| Wet maximum | suitable | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Holder shape | form B | |
| Holder version | metric | |
| Holder size, metric | 20 mm | |
| Dry machining | suitable only under restricted conditions | |
| Holder tolerance class | h6 | |
| Shank diameter | 20 mm | |
| Shank length | 52 mm | |
| Oil | suitable | |
| Shank type | HB | |
| Air | suitable | |
| Tool material | solid carbide | |
| Coating | TiAlN | |
| Cutter diameter | 20 mm | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance Class | d11 | |
| Body diameter | 18.5 mm | |
| Cutting edge length | 38 mm | |
| ISO milling cutter type | End / face mill | |
| Plunge angle | 10 degrees | |
| Number of effective cutters, peripheral side | 5 | |
| Twist direction | right-hand | |
| Twist angle | 42 degrees | |
| Number of corner versions | 1 | |
| Corner / edge | 1 | |
| Corner version | as chamfer | |
| Corner chamfer width | 1 mm | |
| Corner chamfer angle | 45 degrees | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Interface | joint 1 | |
| Gauge length | 52 mm | |
| Usable length | 38 mm | |
| Overall length | 104 mm | |
| Functional length | 52 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | DIN 6527 | |
| Machining method | End milling; countersinking (plunge milling); slot milling | |
| Colour ring | green | |
| Machining strategy | HPC | |
| Type of product | shoulder mill | |
| Correction factor fz | 1.5 | |
| Cutting depth min. | 0.1 mm | |
| Max. cutting depth | 30 mm; 38 mm |
Identification & Classification
| Article number | 2109914 | |
| Catalog number | GG1050 | |
| EAN / GTIN | 4067263134985 | |
| Manufacturer number | GG1050 20 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
200
P
180
P
160
P
140
P
110
M
50
M
35
K
200
Description
Version:
With a new-type knurled profile, optimised for higher feed rates. Improved cutting edge protection thanks to slight edge honing. Tremendous bending strength due to the use of ultra-fine grain substrate.
Feed rate per tooth up to 0.1 mm up to a depth of 2×D (in the slot milled from solid).
Same as 205550.
Feed rate per tooth up to 0.1 mm up to a depth of 2×D (in the slot milled from solid).
Same as 205550.
Advantage:
The tool geometry produces particularly tightly rolled swarf that is discharged via flat chip breaker recesses. As a result, the tool maintains an extremely stable core. Plunge angle of up to 10° possible thanks to generous recess on the front face.
Application:
For roughing machining, particularly suitable for full-slot machining.