{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Value pack indexable insert for milling SEKT 1204 AFTN, HB7625, 50 pieces
Article no.: 2109947
Catalog no.: GG2142
Article code:
Product details
Technical Data
| Number of pieces | 50 pcs. | |
| Max. cutting depth ap | 3 mm; 3 mm | |
| Wet maximum | suitable only under restricted conditions | |
| Dry machining | suitable | |
| Cooling lubricant | yes | |
| Base form | square | |
| Thickness of insert S | 3.18 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 12.7 mm | |
| Diameter of insert d | 12.7 mm | |
| Corner angle | 90 degrees | |
| Setting angle | 45 degrees | |
| Normal clearance angle (main cutting edge) | 15 degrees | |
| ISO-Code | SEKT 1204 AFTN | |
| Cutting depth ap, min. | 0.17 mm | |
| Cutting depth in use | Full slot milling; Side milling | |
| Tool material | Carbide | |
| Machining group | M (stainless steel) | |
| Cutting media, manufacturer’s designation | HB7625 | |
| Grade | HB7625 | |
| Insert thickness T | 3.18 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Insert designation | SEKT 1204 AFTN | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Number of teeth | 4 pcs. | |
| Direction of action | neutral | |
| Suitable for material | stainless steel (M) | |
| Tolerance Class | K | |
| Machining method | face milling (FPL) | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Cutter version | chamfered (T) | |
| Number of potential uses | 4 pcs. | |
| Content | 50 pcs. | |
| Content | set | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 2109947 | |
| Catalog number | GG2142 | |
| EAN / GTIN | 4067263132578 | |
| Manufacturer number | GG2142 INOX | |
| Article class | GGN | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
M
160
M
110
S
40
Description
Version:
- Indexable inserts for higher cutting speeds and feed rates.
- Precision sintered and ground for best surface quality.
- Micro-grain structure gives high strength and wear resistance.
Suitable for:
Content:
50 × 214241 INOX
Note:
Standard application values for ae = 0.5 ... 1×D / ap max = 3.5 mm.