Upat setting tool UHZ for cavity plugs UH

The UHZ mounting pliers are a special tool for quick and efficient installation of UH cavity plugs in panel building materials.

• Flexible installation: The metric internal thread allows screws to be installed flexibly and removed flush with the surface
• High load-bearing capacity: The four-way expansion in the cavity achieves high load-bearing capacities in panel building materials and cavities
• Versatile use: The cavity plug can be used in a variety of ways thanks to the supplied pan head or angle screw
• Optimised installation: Ideal for pre-installation. The UHZ installation pliers enable quick and efficient installation
• Safe application: The metal claws on the edge of the plug prevent the cavity plug from turning in the drill hole

Variant

• Screw (S): For precise adjustment of the clamping force
• Hook (H): For fastening hangers and brackets

1 x setting tool

Function: The correct plug must be selected based on the panel thickness. When tightened with the installation pliers, the plug legs fold out on the rear panel and support the plug. The large contact radius distributes the tensile forces and gives the Upat UH its good holding values. The plug remains in position even when the screw is removed.

Installation: The Upat UH cavity wall plug is installed in advance. Efficient installation with installation pliers: Drill the hole, insert the cavity wall plug. Spread the cavity wall plug using the installation pliers. Position the attachment. Screw in the screw – done. Practical installation without installation pliers: Drill the hole, insert the cavity wall plug. Position the attachment. Spread the cavity plug by screwing in the screw – done!

Tools: Drill, drill press, hammer, setting tool (UHZ), optional screwdriver/electric screwdriver