{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Caliper 16 FN
Article no.: 212915
Catalog no.: L40080 517
Article code:
- Depth gauge: flach
- Thread table: Calipers table
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Technical Data
| Depth gauge | flach | |
| Measuring range | 0 mm - 200 mm | |
| Reading (rail) | 0.05 mm | |
| Scale chrome plated | yes | |
| Depth gauge available | yes | |
| Error limit | 0.05 mm | |
| Locking | Locking screw at top | |
| Guidance | Raised slides | |
| Jaw length | 50 mm | |
| Length of cross tips | 19 mm | |
| Measurement technology | analogue | |
| Thread table | Calipers table |
Identification & Classification
| Article number | 212915 | |
| Catalog number | L40080 517 | |
| EAN / GTIN | 4059192001513 | |
| Manufacturer number | 4100401 | |
| Manufacturer/responsible person | MAHR GmbH Göttingen, Carl-Mahr-Straße 1, 37073 GÖTTINGEN, Germany, www.mahr.de |
Description
Version:
- Vernier and scale have a satin chrome finish for glare free reading
- Locking screw above
- Measuring surfaces made of steel
- Measuring blade for inside measurements
- Slide and beam made of hardened stainless steel
- Step measuring function
- Raised guideway for the protection of the scale
Description:
16 FN Caliper with scale display
- Fixing screw on top Measuring range: 0 - 200 mm
- Nonius value mm: 0.05 mm / 1/128″
Feature:
- Calibration type: Uncalibrated
- Product name: Caliper with scale display
- Product group name: Caliper gauge
- Product group name: MarCal
- Depth measurement: angular
- Product type: 16 FN
- Vernier value inch: 1/128″
- Measuring range: 0 - 8″
- Measuring range: 0 - 200 mm
- Error limit inch: .002″
- Dimension d in mm: 290 mm
- Dimension b in mm: 50 mm
- Dimension c in mm: 19 mm
- Dimension e in mm: 17 mm
- Dimension a in mm: 14 mm
- Dimension f in mm: 3.8 mm
- Error limit (mm): 0.05 mm
- Vernier value mm: 0.05 mm
Standard:
Factory standard