{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Carbide-tipped hammer drill SDS-max “8X”, ⌀ × Overall length: 14X340mm
Article no.: 213674
Catalog no.: 789206
Article code:
Click to enlarge image
Click to enlarge image
4-cutter carbide insert, welded
Click to enlarge image
Product details
Technical Data
| Cooling lubricant | no | |
| Manufacturer’s designation | EXPERT SDS-max '8X' | |
| Interface position | on the machine | |
| Holder type | SDS-Max | |
| Shank length LS | 90 mm | |
| Cutter diameter, min. Dc min. | 14 mm | |
| Cutter diameter, max. Dc max. | 14 mm | |
| Configurable | no | |
| Tolerance of cutter diameter | manufacturer tolerance | |
| Flute length Lc | 200 mm | |
| Number of teeth Z | 4 | |
| Twist direction | right-hand | |
| Product designation (type) | N | |
| Tool material | Carbide | |
| Interface | joint 1 | |
| Usable length L1 | 200 mm | |
| Overall length L | 340 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Machining method | drilling into solid material | |
| Type of product | indexable drill | |
| Content | single part |
Identification & Classification
| Article number | 213674 | |
| Catalog number | 789206 | |
| EAN / GTIN | 4059952532813 | |
| Manufacturer number | 2608900207 | |
| Manufacturer/responsible person | Robert Bosch Power Tools GmbH, Max-Lang-Straße 40-47, 70771 Leinfelden-Echterdingen, Germany, www.bosch-professional.com |
Description
Version:
Special carbide insert geometry for longer tool lives.
Drill head with square cross section from ⌀ 16 mm.
New generation EXPERT SDS-max “8X” with welded 4-edge solid carbide head. Shaped cutters for high drilling performance, long working life and low wear. No digging in when drilling in reinforced concrete.
Drill head with square cross section from ⌀ 16 mm.
New generation EXPERT SDS-max “8X” with welded 4-edge solid carbide head. Shaped cutters for high drilling performance, long working life and low wear. No digging in when drilling in reinforced concrete.
Application:
For drilling concrete, natural stone, and masonry.
Note:
Generation SDS-max-7 drill (with embedded carbide cutting edges, soldered) in the size 35×520 – 52×520 under No. 789204.