{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Master Alu solid carbide milling cutter, HPC HPC, uncoated, ⌀ e8 DC: 6mm
Article no.: 214302
Catalog no.: 203208
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Wet minimum | suitable only under restricted conditions | |
| Feed rate per tooth side milling fz | 0.045 mm | |
| Max. cutting depth, Full slot milling | 6 mm | |
| Max. cutting depth, Side milling | 24 mm | |
| Wet maximum | suitable | |
| Cutting width max. ae | 0,1×D | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL00600105 | |
| Holder shape | plain shank | |
| Dry machining | suitable | |
| Holder tolerance class | h6 | |
| Arbor size | 6 | |
| Diameter of shaft DS | 6 mm | |
| Length of shank LS | 32.7 mm | |
| Shank type | HA | |
| Air | suitable | |
| Cooling lubricant | yes | |
| Series | Master Alu | |
| Manufacturer’s designation | GARANT Master Alu VHM-Fräser HPC | |
| Tool material | solid carbide | |
| Machining group | N (non-ferrous metals); O (other) | |
| Cutter diameter Dc | 6 mm | |
| Recess diameter D1 | 5.8 mm | |
| Cutting edge length Lc | 24 mm | |
| Shoulder length | 32 mm | |
| Balancing quality | G 2,5 | |
| Number of effective cutters (peripheral side) Z | 5 | |
| Number of effective cutters (end face) Z | 5 | |
| Twist direction | right-hand | |
| Twist angle | 38 degrees | |
| Corner / edge | 1 | |
| Corner chamfer angle | 90 degrees | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal | |
| Number of clamping slots | 5 | |
| Tool application group | W | |
| Cutting media, manufacturer’s designation | VHM | |
| Feed rate per tooth in | alu short-chipping | |
| Coating | uncoated | |
| Interface | joint 1 | |
| Gauge length A | 32 mm | |
| Overall length L | 65 mm | |
| Functional length | 35.5 mm | |
| Max. speed | 35’000 min-1 | |
| Weight | 23 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | Werksnorm | |
| Data carriers | without data carrier | |
| Machining method | circular milling (round milling) (FZI); face milling (FPL); form milling (die milling) (FFO); shoulder milling (FEC); slot milling (FNU) | |
| Colour ring | yellow | |
| Machining strategy | HPC | |
| Type of product | shoulder mill | |
| Content | single part | |
| Correction factor fz | 2 | |
| Cutting depth min. | 0.01 mm | |
| Cutting depth in use | Full slot milling; Side milling |
Identification & Classification
| Article number | 214302 | |
| Catalog number | 203208 | |
| EAN / GTIN | 4062406565916 | |
| Manufacturer number | 203208 6 | |
| Article class | 11X | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
500
N
450
N
400
N
180
N
140
N
180
N
130
N
110
N
160
N
140
N
140
N
120
N
140
N
260
N
140
N
120
Description
Version:
For finishing operations.
Special geometry for optimum chip evacuation.
Unequal spacing gives high intrinsic stability and smooth cutting action.
For profile milling as a finishing operation.
Special geometry for optimum chip evacuation.
Unequal spacing gives high intrinsic stability and smooth cutting action.
For profile milling as a finishing operation.