{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling SDHT 0903 AEEN, for face mills, HB7710
Article no.: 214722
Catalog no.: 214470
Article code:
Product details
Technical Data
| Max. cutting depth ap | 3 mm; 3 mm | |
| Dry machining | suitable | |
| Cooling lubricant | yes | |
| Base form | square | |
| Thickness of insert S | 3.18 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 9.525 mm | |
| Height of cutting edge | 3.18 mm | |
| Diameter of insert d | 9.525 mm | |
| Corner chamfer angle | 45 degrees | |
| Corner angle | 90 degrees | |
| Setting angle | 45 degrees | |
| Normal clearance angle (main cutting edge) | 15 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 20 degrees | |
| ISO-Code | SDHT 0903 AEEN | |
| Cutting depth ap, max. | 3 mm | |
| Cutting depth in use | Full slot milling; Side milling | |
| Feed rate per tooth min. fz | 0.17 mm | |
| Feed rate per tooth max. fz | 0.17 mm | |
| Tool material | Carbide | |
| Machining group | K (cast iron) | |
| Cutting media, manufacturer’s designation | HB7710 | |
| Coating | coated | |
| Grade | HB7710 | |
| Insert thickness T | 3.18 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Insert designation | SDHT 0903 AEEN | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | neutral | |
| Suitable for material | cast iron (K) | |
| Tolerance Class | H | |
| Machining method | face milling (FPL) | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Number of potential uses | 4 pcs. | |
| Weight | 3.2 g | |
| Content | single part | |
| Correction factor fz | 2.5 |
Packaging units
| 1 Carton | 10 pieces |
Identification & Classification
| Article number | 214722 | |
| Catalog number | 214470 | |
| EAN / GTIN | 4045197319555 | |
| Manufacturer number | 214470 GG | |
| Article class | 21A | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
K
235
Description
Version:
- Indexable inserts for higher cutting speeds and feed rates.
- Precision sintered and ground for best surface finish quality.
- Micro-grain structure gives high strength and wear resistance.
Note:
Standard application values for ae = 0.5 ... 1×D / ap max = 3 mm.