Linear Gauge Counter EH (need 21HZA195)

• Resolution: 0.0001 / 0.001 / 0.01 mm
• Max. input frequency: 2.5 MHz (2-phase square wave signal), trigger speed dependent on the linear gauge connected
• Input signal: Differential square wave signal
• For use with measuring devices: LGK, LGF, LGB, LGM, LGH (except for LGF-Z with reference point, LGH with 0.01 µm graduation)

With the functions: Digimatic data output, ON/OFF, signal input PRESET or external zeroing, zeroing, BCD output, error display/output, hiding the last digit, external HOLD, MAX / MIN / difference measurement, mm/inch changeover, external lift, max. value hold, RS link, RS-232C output, USB output for SENSORPAK, analogue output, external input of tolerances (if using a PC), direction of measurement reversible.
Multi-function display.

• The standard RS-232C and USB interfaces (in conjunction with Sensorpak software) permit easy communication with an external PC
• The RS LINK function permits multiple EH counters to be connected to a single bus (RS LINK, max. 10 devices).
• Addition and subtraction calculations can be performed between the contact points of devices with two inputs.

Multi-functional Counter. The standard RS-232C and USB interfaces allows easy communication with an external PC (the USB can only be used with SENSORPAK). The built-in networking function allows you to easily create a multi-point measuring system (RS link, max. 10 Counter). The 2-gauge input type can calculate additions and subtractions between two gauges.

• Applicable gauge: LGF, LGK, LGB, LG, LGM, LGH, (excluding LGF-Z, with reference point, LGH with 0.01 µm resolution), LG100 with connector adapter plug 21HZA195
• BCD output: Yes
• Counting direction switchable: Yes
• Digimatic data output: Yes
• Error display/output:
• Extern tolerance set , (when a PC is used): Yes
• External HOLD: Yes
• External, PRESET / ZERO: Yes
• Functions: (need 21HZA195)
• Gauge inputs: 1
• I/O Output:
• Input signal type: Differential square-wave
• Lower digit blank-out: Yes
• MAX / MIN / Difference measurement: Yes
• Max. input, frequency: 2,5 MHz (2-phase square wave),
  response speed depends
  on gauge specification
• Mm / inch switching: Yes
• Model: EH-101P
• ON/OFF: Yes
• Power supply: Via AC Adapter (12-24 V DC, 700 mA No. 527428 Standard Accessories),
• PRESET: Yes
• Resolution: 0,0001/0,001/0,01
• RS link: Yes
• RS-232C Output:
• Size/Dimension: 0,205 X 0,205 X 0,175 M
• Tolerance judgement display: LED display (3 steps: Amber, Green, Red/5 steps: Amber, Amber flashing, Green, Red flashing, Red)
• USB Output for SENSORPAK:
• ZERO SET: Yes

Counting direction switchable: Yes
Display: 8-digit and one negative [-] sign, LED (green)
ON/OFF: Yes
Metric/inch switchable: Yes
Power supply: Via power supply unit (12-24 V DC, 700 mA no. 527428 standard accessories).