{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Precision taper sheet and tube drill HSS, TiN, Cutter ⌀ DC: 36-50mm
Article no.: 215653
Catalog no.: 118030
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Holder version | metric | |
| Holder size, metric | 13 mm | |
| Shank diameter | 13 mm | |
| Shank type | HB | |
| Cutter diameter, min. | 36 mm | |
| Cutter diameter, max. | 50 mm | |
| Configurable | no | |
| Tolerance of cutter diameter | manufacturer tolerance | |
| Twist direction | right-hand | |
| Point geometry | N | |
| Product designation (type) | N | |
| Tool material | HSS | |
| Machining group | M (stainless steel); N (non-ferrous metals); O (other); P (steel) | |
| Coating | TiN | |
| Interface | joint 1 | |
| Overall length | 95 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | Werksnorm | |
| Machining method | drilling into solid material | |
| Colour ring | without | |
| Type of product | stepped drill | |
| Content | single part |
Identification & Classification
| Article number | 215653 | |
| Catalog number | 118030 | |
| EAN / GTIN | 4045197036544 | |
| Manufacturer number | 118030 36-50 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
N
N
P
P
P
P
M
M
K
Description
Version:
With sharp drill point, pre-drilling not necessary. Conically increasing cutting edges and radially relief ground circumference for a paring cut. With scale in the flutes. Three drive flats on the shank.
TiN coating: Higher cutting speeds and significantly longer tool life. Specially for soft materials with a tendency to smear.
TiN coating: Higher cutting speeds and significantly longer tool life. Specially for soft materials with a tendency to smear.
Application:
Leaves no burr or chatter marks.
Sheet metal 0.1 − 2 mm, stainless steel 0.1 − 1 mm, non-ferrous metals: 0.1 − 5 mm, plastics up to 10 mm.
Sheet metal 0.1 − 2 mm, stainless steel 0.1 − 1 mm, non-ferrous metals: 0.1 − 5 mm, plastics up to 10 mm.