{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Replacement earplugs set, 5 pairs GARANT, Type: 28
Article no.: 2157804
Catalog no.: 097683
Article code:
Product details
Technical Data
| Colour | orange | |
| Cord provided | no | |
| Material of earplugs | polyurethane (PU) | |
| Plug properties | deformable | |
| Contents pairs | 5 pair | |
| Type of product | earplugs | |
| SNR value (noise attenuation) | 28 dB | |
| Standard | EN 352-2 | |
| Noise attenuation | passive | |
| Reuse | reusable |
Identification & Classification
| Article number | 2157804 | |
| Catalog number | 097683 | |
| EAN / GTIN | 4067263129745 | |
| Manufacturer number | 097683 28 | |
| Article class | 01E | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Replacement earplugs set, 5 pairs.
Warning:
Intended use
Reasonably foreseeable misuse
- Position band under chin, across head or on back of neck.
- Only with replacement earplugs, art. no.
- 097683.
- Protects against injurious noise.
- Optimum protective effect is achieved only when the residual noise level reaching the ear of the wearer is within the range 70 dB to 80 dB.
- Subtraction of the standard deviation from the average noise attenuation yields an assumed protective effect of the hearing protection system under consideration.
- The attenuation level specified for these products is based on the attenuation of continuous noise.
- These earplugs are not suitable for use in environments with intermittent or spontaneous noise where a higher level of sound protection is required, or in areas that require additional protection against low frequencies in high-noise environments.
Reasonably foreseeable misuse
- Combination with other protective equipment must not impair the protective effect and must not hinder the wearer in his activities.
- This product may be affected by certain chemical substances.
- Further information should be obtained from the manufacturer.