{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Vap Tap machine tap HSS-E ISO 228 +0.05 mm, vaporised, G: G1/8
Article no.: 2157860
Catalog no.: 137765
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Series | Vap Tap | |
| Manufacturer’s designation | GARANT Vap Tap Maschinen-Gewindebohrer | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Holder tolerance class | h9 | |
| Shank diameter DS | 7 mm | |
| Thread type | G | |
| Cutter diameter D | 9.73 mm | |
| Thread D | G1/8 | |
| Thread pitch | 0.907 mm | |
| Turns per inch | 28 | |
| Length of tapping part Lc | 29.19 mm | |
| Number of teeth | 3 | |
| Twist direction | right-hand | |
| Twist angle | 40 degrees | |
| Type of thread-cutting tool | machine tap for dynamic machining | |
| Taper lead form | C | |
| Application for type of drilling | blind hole | |
| To depth (x diameter) | 3 | |
| Number of clamping slots | 3 | |
| Core hole diameter | 8.8 mm | |
| Flank angle | 55 degrees | |
| Square-drive width across flats □ | 5.5 mm | |
| Tool material | HSS-E | |
| Coating | vaporised | |
| Interface | joint 1 | |
| Overall length L | 90 mm | |
| Cutting direction | right-hand cutting | |
| Standard | DIN 5156 | |
| Machining method | thread processing internal (EGI) | |
| Colour ring | green | |
| Type of product | taps |
Identification & Classification
| Article number | 2157860 | |
| Catalog number | 137765 | |
| EAN / GTIN | 4069515001373 | |
| Manufacturer number | 137765 G1/8 | |
| Article class | 13V | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
18
N
13
P
18
P
15
P
15
P
6
M
6
N
15
Description
Version:
GARANT Vap Tap general-purpose tap. Can be used reliably in a wide range of materials. Optimised neck and flute length for improved chip evacuation when working on deep threads. High-performance HSS‑E tool material with higher vanadium content for improved wear resistance. Surface vaporised for reduced edge build-up.
Tolerance class ISO 228 + 0.05 mm.
Tolerance class ISO 228 + 0.05 mm.
Application:
For Whitworth parallel pipe threads DIN-ISO 228/1 (threads that do not form a seal within the connection).
For components which are galvanised, or shrink slightly when hardened.
For components which are galvanised, or shrink slightly when hardened.
Recommendation:
We recommend deviating from the DIN data (see table) by drilling the tapping hole ⌀ 0.05mm larger.