{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Arbor for indexable drills, PSC 50 short, for shank ⌀ Ds: 16mm
Article no.: 2157915
Catalog no.: 308584
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, axially concentric | |
| Interface position | on the machine; on the workpiece | |
| Holder type | polygonal hollow shank taper with flat surface contact; plain shank | |
| Interface coding | CCS05000110; ZYL01602210 | |
| Holder version | dimensionless nominal size with cooling; metric with cooling lubricant holes | |
| Holder size, metric | 16 mm | |
| Holder size, no dimensions | 50 | |
| Type of mounting | spigot; hole (internal mounting) | |
| Shank diameter DS | 16 mm | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | Werkzeughalter für Vollbohrer | |
| Interface on machine side | PSC 50 | |
| Interface on workpiece side | plain shank | |
| Min. clamping diameter D1 | 16 mm | |
| Max. clamping diameter D1 | 16 mm | |
| Gauge length A | 65 mm | |
| External diameter, on the tool side D | 36 mm | |
| Concentricity | 3 µm | |
| Balance quality G at rotational speed | g 2.5 at 25,000 rpm | |
| Machining strategy | HPC; HSC | |
| Format | short | |
| Tool pull-out protection | yes | |
| Interface | joint 1; joint 2 | |
| Type of product | side lock arbor | |
| Overall length L | 95 mm | |
| Standard | ISO 26623-1 | |
| Shape | PSC 50 | |
| With hole for RFID data carrier | yes | |
| Through-coolant available | yes | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 2157915 | |
| Catalog number | 308584 | |
| EAN / GTIN | 4067263141136 | |
| Manufacturer number | 308584 16 | |
| Article class | 31A | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- Position of the grub screw for countersinking in the indexable drill offset by 0.4 mm.
- When tightening the increased contact face ⌀ is clamped against the front face of the arbor.
- Better support, allowing higher feed rates.
- High concentricity due to 3 µm ground flat contact face.
- With RFID/Balluffchip bore.
Application:
For mounting all standard indexable drills to DIN 6595, Part 1.
Suitable for:
All indexable drills with parallel shank to DIN 6595, Part 1.