{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
5-axis vice TeleCentric, Type: 70
Article no.: 2157984
Catalog no.: 361255
Article code:
Product details
Technical Data
| Series | TeleCentric | |
| Interchangeable jaws | yes | |
| Clamping strip height | 27.1 mm | |
| Clamping slot width | 20 mm | |
| Clamping force selection | at 45 Nm; at 45 Nm | |
| Clamping force | 30 kN; 30 kN; 30 kN; 30 kN | |
| Maximum torque | 45 Nm | |
| With bore | yes | |
| Hole diameter | 25 mm | |
| Pitch | 200 | |
| With thread | yes | |
| Thread size | M10 | |
| With width across flats | yes | |
| Width across flats | 14 mm | |
| Version | zero-point clamping system | |
| Material | steel | |
| Surface | hardened | |
| Type of product | machine vice |
Identification & Classification
| Article number | 2157984 | |
| Catalog number | 361255 | |
| EAN / GTIN | 4250364404709 | |
| Manufacturer/responsible person | ALLMATIC-Jakob Spannsysteme GmbH, Jägermühle 10, 87647 Unterthingau, Germany, www.allmatic.de |
Description
Version:
- Optimum for use on 5-axis machining centres.
- Conventional clamping and gripper clamping can be performed.
- Telescopic spindles and obstructive contours remain unchanged.
- Simple centre-reference programming with no displacement of the zero point.
- Accessibility of the workpiece irrespective of the clamping span.
- Symmetrical design = workpiece remains central and parallel - the dimensions of the material are distributed symmetrically.
- Thanks to the quick-release fastening, pairs of jaws can be changed within 10 seconds.
- Constant clamping force thanks to the low-maintenance telescopic spindle.
- Supplied as standard with 25H6 M10 mounting holes for zero-point clamping system with 200 mm pitch.
- Integral scaled ring for fine adjustment of the centre position.
- Clamping force 30 kN at 45 Nm linear.
Supplied with:
Hand crank, Quick Start Guide.