{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
NC high-pressure vice HiPo Clamp with power intensifier, Type: 125
Article no.: 2158121
Catalog no.: 360455
Article code:
Product details
Technical Data
| Series | HiPo Clamp | |
| Manufacturer’s designation | NC-Hochdruckspanner HiPo Clamp | |
| Clamping range | 1 | |
| Clamping range quick adjustment | no | |
| Base body width B | 125 mm | |
| Interchangeable jaws | yes | |
| Clamping force selection | maximum clamping force | |
| With power intensifier | yes | |
| With bore | yes | |
| Pitch | 200 | |
| With thread | yes | |
| Thread size M | M16 | |
| Pivoting jaw | no | |
| Can be swivelled | no | |
| Version | zero-point clamping system | |
| Surface | ground; nitrided | |
| Accuracy | 0.02 mm | |
| Type of product | machine vice |
Identification & Classification
| Article number | 2158121 | |
| Catalog number | 360455 | |
| EAN / GTIN | 4069515011327 | |
| Manufacturer number | 360455 125 | |
| Article class | 31F | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- Pairing accuracy 0.02 mm.
- Alignment dimensions compatible with other manufacturers.
- Universal design accepts wide variety of jaw systems.
- Slides induction hardened.
- Fully enclosed spindle (minimises cleaning requirement).
- Tapped holes on each side for workpiece backstop.
- With 25H6 M10 holes at 200 mm pitch for zero-point clamping system.
- All faces apart from the end face ground: Can be used horizontally or laterally.
- Angled gear drive can be attached.
- Fully enclosed and nitrided spindle.
- Tapped hole for workpiece backstop.
Supplied with:
Optional extras:
Note:
Warning:
Intended use
Reasonably foreseeable misuse
- Clamping device for mounting on a machine intended to perform milling operations.
- For clamping workpieces in the blank or partially machined state.
- Adaptation to workpiece geometry is possible through various designs and attachment jaws.
- Use only when correctly assembled and with safety devices and guards on the machine fully operational.
Reasonably foreseeable misuse
- Do not use the centring vice for turning work.
- Do not mount components not in accordance with the specification.
- Do not make any unauthorised modifications.
- Do not use in explosion hazard areas.