{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling XDPW 070308 SR, for FeedKing HPC mills, KU7710
Article no.: 2158362
Catalog no.: 212940
Article code:
Product details
Technical Data
| Max. cutting depth ap | 0.6 mm; 0.6 mm | |
| Wet maximum | suitable only under restricted conditions | |
| Dry machining | suitable | |
| Air | suitable only under restricted conditions | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | XDPW 070308 SR | |
| Base form | base profile X | |
| Thickness of insert S | 3.18 mm | |
| Length of cutting edge l | 6.8 mm | |
| Height of cutting edge | 3.18 mm | |
| Diameter of insert d | 8 mm | |
| Corner radius R | 0.8 mm | |
| Rake face chamfer width C | 20 mm | |
| Rake face chamfer angle | 15 degrees | |
| Normal clearance angle (main cutting edge) | 15 degrees | |
| Normal clearance angle, main cutting edge | 15 degrees | |
| ISO-Code | XDPW 070308 SR | |
| Attachment hole diameter | 3.55 mm | |
| Cutting depth ap, min. | 0.05 mm | |
| Cutting depth ap, max. | 0.85 mm | |
| Cutting depth in use | Full slot milling; Side milling | |
| Feed rate per tooth min. fz | 0.65 mm | |
| Machining group, manufacturer-specific | K | |
| Machining group | K (cast iron) | |
| Cutting media, manufacturer’s designation | HB4225 | |
| Coating | CVD | |
| Grade | HB4225 | |
| Insert thickness T | 3.18 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Insert designation | XDPW070308 | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Number of teeth | 4 pcs. | |
| Direction of action | neutral | |
| Suitable for material | cast iron (K) | |
| Machining strategy | HPC | |
| Type of fastening | hole | |
| Number of potential uses | 4 pcs. | |
| Content | single part | |
| Correction factor fz | 2.5 |
Packaging units
| 1 Carton | 10 pieces |
Identification & Classification
| Article number | 2158362 | |
| Catalog number | 212940 | |
| EAN / GTIN | 4069515004930 | |
| Manufacturer number | 212940 GGG | |
| Article class | 21A | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
K
165
Description
Note:
Standard application values for ae = 0.5 … 1×D / ap max
Downloads & documents
Suitable products
Services & product advisors
More search terms & categories
Coating:
CVD
Type of product:
cutter insert
Machining strategy:
HPC
Category:
Indexable inserts for longitudinal turning tools & face turning tools
Category:
Indexable inserts for high feed rate milling cutter
Category:
Indexable inserts for side milling cutters & parting off milling cutters
Category:
Indexable inserts for grooving tools
Brand:
GARANT