{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling XDPW 09T308 SR, for FeedKing HPC mills, HB4225
Article no.: 2158501
Catalog no.: 212963
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | square | |
| Insert width | 9.5 mm | |
| Blade thickness | 3.97 mm | |
| Insert length | 9.5 mm | |
| Insert version | neutral | |
| Cutting edge length | 8.3 mm | |
| Cutting edge height | 3.97 mm | |
| Insert diameter | 9.5 mm | |
| Corner radius | 8 mm | |
| Corner chamfer length | 0.8 mm | |
| Corner chamfer angle | 12 degrees | |
| Corner angle | 90 degrees | |
| Rake face chamfer width | 20 mm | |
| Rake face chamfer angle | 15 degrees | |
| Rake angle | 0 degrees | |
| Setting angle | 12 degrees | |
| Normal clearance angle (main cutting edge) | 15 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 9 degrees | |
| Normal clearance angle (flat cutting edge) | 6 degrees | |
| Radius of main cutting edge | 17 mm | |
| ISO-Code | XDPW 09T308 SR | |
| Attachment hole diameter | 4.2 mm | |
| Tool material | HC | |
| Machining group, manufacturer-specific | K | |
| Machining group | K (cast iron) | |
| Tool application group | K | |
| Cutting media, manufacturer’s designation | HB4225 | |
| Coating | CVD | |
| Insert thickness | 3.97 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | XDPW 09T308 SR | |
| Interface coding for insert according to ISO TS 13399-60 | XDPW09T308SR | |
| Insert designation | XDPW09T308 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | neutral | |
| Suitable for material | cast iron (K) | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Roughing | |
| Machining strategy | HPC | |
| Type of fastening | Hole | |
| Chip breaker | no | |
| Cutter version | chamfered and rounded (S) | |
| Cutting conditions | continuous | |
| Number of potential uses | 4 pcs. | |
| Weight | 6 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 2158501 | |
| Catalog number | 212963 | |
| EAN / GTIN | 4069515004947 | |
| Manufacturer number | 212963 GGG | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
K
165
Description
Note:
Standard application values for ae = 0.5 … 1×D / ap max