{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Revolving lathe centre 60°, Morse taper: 5
Article no.: 2158626
Catalog no.: 320649
Article code:
Product details
Technical Data
| Herstellerbezeichnung | MKG00501080 | |
| Länge gesamt L | 246 mm | |
| Durchmesser Kopf D | 58 mm | |
| Ausführung Zentrierspitze | mitlaufend | |
| Spitzenwinkel α | 30 Grad; 60 Grad | |
| größter Spitzen-Durchmesser D1 | 49 mm | |
| stumpfer Kegel stirnseitig | ja | |
| kleinster Spitzen-Durchmesser D1 min | 12 mm | |
| Aufnahme maschinenseitig | MK5 | |
| mit Spannflächen | nein | |
| mit Hartmetallspitze | nein | |
| mit Stoßdämpfung | nein | |
| Nutzlänge L2 | 49 mm | |
| Halbe Zentrierspitze | nein | |
| auswechselbare Zentrierspitzen enthalten | nein | |
| typische Verwendung | Drehen | |
| Gewicht | 2.46 kg | |
| Produktart | Zentrierspitze |
Identification & Classification
| Article number | 2158626 | |
| Catalog number | 320649 | |
| EAN / GTIN | 4069515008341 | |
| Manufacturer number | 320649 5 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- Lightweight version with slim body.
- Precision roller bearings for high concentricity.
- Maintenance-free due to lifetime lubrication.
- Special seal prevents ingress of dirt and coolant.
- MT shank hardened and ground.
With extended centre, point angle 60° / 30°.
Extremely slim, cylindrical tip geometry for maximum accessibility on the flat face.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
Mainly used for machining small and smallest parts on all types of lathes.
Particularly suitable for the production of even smaller external threads directly on the face side (space for the threading chaser). Allows clamping on internal (recessed) centrings.
Particularly suitable for the production of even smaller external threads directly on the face side (space for the threading chaser). Allows clamping on internal (recessed) centrings.