{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Eco toolholder axial single, right-hand, HSK-T 63, for toolholder square: 25mm
Article no.: 2158701
Catalog no.: 318622
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, decentrally adjustable | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | Eco Werkzeughalter axial 1fach, rechts, HSK-T 63 | |
| Holder type | hollow shank taper HSK | |
| Holder shape | Standard | |
| Holder version | dimensionless nominal size without cooling | |
| Holder size, no dimensions | 63 | |
| Type of mounting | hole (internal mounting) | |
| Shank length LS | 130 mm | |
| Interface on machine side | HSK-T 63 | |
| Gauge length A | 130 mm | |
| External diameter, tool-end D | 78 mm | |
| Functional length | 88 mm | |
| Functional height H | 25 mm | |
| Functional depth | 25 mm | |
| Tool position | right-hand | |
| Axially offset | no | |
| With cooling channel bore | yes | |
| Interface | joint 1; joint 2 | |
| Type of product | square mounting | |
| Overall length L | 162 mm | |
| Overall height H1 | 78 mm | |
| Overall width B1 | 78 mm | |
| Standard | ISO 12164-3 | |
| Through-coolant available | yes | |
| Material | steel | |
| Surface treatment | ground | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 2158701 | |
| Catalog number | 318622 | |
| EAN / GTIN | 4069515009010 | |
| Manufacturer number | 318622 25 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
With adjustable cooling nozzle with internal thread.
GARANT - Optimisation of tool life, better surface finishes, increased process reliability and increased productivity due to GARANT Eco.
Slim contour for better accessibility.
GARANT - Optimisation of tool life, better surface finishes, increased process reliability and increased productivity due to GARANT Eco.
Slim contour for better accessibility.
Application:
For use on lathes and milling centres.
For mounting ISO toolholders with square shanks.
For mounting ISO toolholders with square shanks.
Note:
With pass-through shim. Suitable for toolholders with shank 20 and 25 mm.